466140
7
Zoom out
Zoom in
Previous page
1/25
Next page
34
WHEN MORE THAN ONE TRANSMITTER IS USED
1. User shall remove all the batteries from the weather station and transmitters, and wait 60 seconds.
2. Insert the batteries in the first transmitter.
3. Within 2 minutes of powering up the first transmitter, insert the batteries in the weather Station. Once
the batteries are in place, all segments of the LCD will light up briefly. Following the indoor
temperature/humidity and the time as 0:00 will be displayed. If these information are not displayed on
the LCD after 60 seconds, remove the batteries from both units and wait for at least 60 seconds
before reinserting them.
4. The outdoor temperature data from the first transmitter (channel 1) should then be displayed on the
weather station. Also, the signal reception icon will be displayed. If this does not happen after 2
minutes, the batteries will need to be removed from both units and reset from step 1.
5. Insert the batteries in the second transmitter as soon as the outdoor temperature readings from the
first transmitter are displayed on the weather station.
Note : User shall insert the batteries into the second transmitter within 30 seconds after the weather
station displays the information of the first transmitter.
6. The outdoor temperature from the second transmitter and the "channel 2" icon should then be
displayed on the weather station. If this does not happen after 2 minutes, the batteries will need to be
removed from all the units and reset from step 1.
7. Insert the batteries in the third transmitter as soon as the "channel 2" icon and outdoor data are
displayed on the weather station. Then within 2 minutes, the channel 3 outdoor data from the third
transmitter will be displayed and the channel icon will shift to "3" once the third transmitter is
successfully received. If this does not happen, user shall restart the setting up from step 1.
Note : User shall insert the batteries into the third transmitter within 30 seconds after the weather
station displays the information of the first transmitter or immediately after reception of the second
transmitter is finished.
8. In order to ensure sufficient 868 MHz transmission however, the distance between the weather
station and the transmitter should not be more than 100 meters (see notes on “Positioning” and 868
MHz Reception”).
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 35.1026.54.IT - Focus Funk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 35.1026.54.IT - Focus Funk in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TFA 35.1026.54.IT - Focus Funk

TFA 35.1026.54.IT - Focus Funk User Manual - German - 27 pages

TFA 35.1026.54.IT - Focus Funk User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info