466140

TFA 35.1026.54.IT - Focus Funk Manual

6
Zoom out
Zoom in
Previous page
1/25
Next page
33
Note:
In the event of changing batteries in any of the units, all units need to be reset by following the setting up
procedures. This is due to a random security code assigned by the transmitter at start-up. This code must be
received and stored by the weather station in the first 3 minutes of power being supplied to the transmitter.
SETTING UP:
WHEN ONE TRANSMITTER IS USED
1. First, insert the batteries in the transmitter (see “How to install and replace batteries in the
temperature transmitter” above).
2. Within 2 minutes of powering up the transmitter, insert the batteries in the weather station (see
“How to install and replace batteries in the weather station” above). Once the batteries are
in place, all segments of the LCD will light up briefly. Following the indoor temperature/humidity
and the time as 0:00 will be displayed. If this information is not displayed on the LCD after 60
seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once
the indoor data is displayed user may proceed to the next step.
3. After the batteries are inserted, the weather station will start receiving data signal from the
transmitter. The outdoor temperature data should then be displayed on the weather station. If
this does not happen after 2 minutes, the batteries will need to be removed from both units and
reset from step 1.
4. In order to ensure sufficient 868 MHz transmission however, the distance between the weather
station and the transmitter should not be more than 100 meters (see notes on “Positioning” and “868
MHz reception”).
Note:
In the event of changing batteries of the units, ensure the batteries do not spring free from the contacts.
Always wait at least 1 minute after removing the batteries before reinserting, otherwise start up and
transmission problems may occur.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 35.1026.54.IT - Focus Funk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 35.1026.54.IT - Focus Funk in the language / languages: English as an attachment in your email.

The manual is 0,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TFA 35.1026.54.IT - Focus Funk

TFA 35.1026.54.IT - Focus Funk User Manual - German - 27 pages

TFA 35.1026.54.IT - Focus Funk User Manual - Dutch - 25 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info