658212

TFA 30.3039.IT Manual

40
Zoom out
Zoom in
Previous page
1/126
Next page
39
information in learning mode. In learning mode, the serial number of the
entered channel is always displayed for the corresponding channel.
In the channel display, a status information symbol can be displayed for
every transmitter. It is a bar that is displayed under the channel number.
If the bar flashes, the batteries of the corresponding transmitter are weak
and should be replaced (in this case, a “TX” symbol also appears in the
temperature display area when the corresponding channel is
selected/displayed). If a bar is displayed constantly, radio contact to the
corresponding transmitter has been interrupted.
Note:
After the batteries of a transmitter are changed, we recommend
activating the comprehensive transmitter search in learning mode in
order to re-establish contact as quickly as possible.
A transmitter can be entered into a receiving device for only three hours
after it is started up. The transmitter then only transmits its current
measured values and can no longer be entered on a receiving device.
LEARNING MODE:
Learning mode allows you to manually start a transmitter search. It is
possible to enter a transmitter individually on every channel. Furthermore
a transmitter that was already entered can be removed.
Press SET button to enter setting mode.
CH1-8 and LRN appear in the display.
The channel numbers start flashing.
If a transmitter is already entered on a channel, a triangle is
displayed above the corresponding channel number.
Comprehensive channel search
Press the OK/MAX/MIN button to start a comprehensive
transmitter search.
LEARNING and the channel numbers appear on the display
with a black bar.
The KlimaLogg Pro searches for transmitter signals for three
minutes.
If a transmitter signal is received, the bar under the
corresponding channel number disappears.
Transmitters that have already been entered remain, and
transmitters that were previously unknown are successively
assigned.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 30.3039.IT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 30.3039.IT in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info