658212

TFA 30.3039.IT Manual

39
Zoom out
Zoom in
Previous page
1/126
Next page
38
pressed and held for three seconds, the progress of the reset is
shown in % on the memory display. The KlimaLogg Pro
automatically restarts when the reset is complete.
Note:
Note that through the main reset also all recorded data will deleted. If
necessary, please ensure that there is no relevant data on the
KlimaLogg Pro that has not yet been retrieved or transferred to the PC.
If the device shows a malfunction, we recommend that you firstly check
the batteries and try a normal reboot of the unit. If this does not help, we
recommend that you do the main reset.
TRANSMITTERS:
If you use your logger with additional transmitters that were entered
into the logger during startup or via the learning mode, you see a
number in the channel display for every assigned channel.
After inserting the batteries in to the transmitter, the transmitter
automatically starts transferring the outdoor values.
After successful start up of the transmitter close the battery
compartment carefully.
In the normal view and as well as in history mode, you can scroll
up and down through the existing channels by pressing the + or -
button. A triangle is displayed above the currently selected channel
symbol, and the current channel values are displayed in the
temperature and humidity display area.
The compatible external transmitters (Kat.Nr. 30.3180.IT and
30.3181.IT) each have their own predefined serial numbers (four-
digit, alphanumeric). This serial number is printed on the respective
transmitter and is also briefly displayed on the transmitter’s display
when it is started up. The serial number is also displayed on the
text display (if the transmitter has been selected as the current one
on the KlimaLogg Pro). The PC software allows you to assign an
individual name to each channel (except for the logger’s own
measured values. The name “INDOOR” is always displayed with
these values.)
Note:
If you do not know for certain which transmitter is entered for which
channel in your individual channel designations, you can call up this
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TFA 30.3039.IT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TFA 30.3039.IT in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info