Manual Texas Snow King 565 TG (page 29 of 72) (English, German, Danish, French)

636768

Zoom out

Zoom in

1/72

Draining fuel sediment cup

The sediment cup prevents dirt and water from entering the carburetor. If the engine has not been

engaged over a period time, the sediment cup should be cleaned before use.

 Turn the fuel valve to the off position.

 Remove the sediment cup using a 10 mm wrench.

 Remove the o-ring and filter.

 Clean each of the parts in a high flash-point solvent.

 Reinstall the filter, o-ring, and sediment cup. Tighten with 10 mm wrench to secure.

 Return the fuel valve to the ON position and check for leaks

Draining the carburetor

 Loosen the carburetor drain screw.

 Allow gasoline to drain completely into suitable container.

 Re-tighten drain screw.

8. Storage

Storage preparation

Proper preparation for long term storage is essential for keeping your snow blower free from rust

corrosion and prevent part and function to parts impair. The following steps will make the engine

easier to start after storage and prevent your snow blower from rusting during long term period.

Cleaning

If the engine has been running, allow it to cool for at least half an hour before cleaning. Clean all

exterior surfaces, seal up any damaged paint, and coat other areas that may rust with a light film of

oil.

 Using a garden hose or high-pressure cleaner can force water into the air cleaner or muffler

opening. Water in the air cleaner will soak the air filter, and water that passes through the

air filter or muffler can enter the cylinder, causing damage.

 Water contacting a hot engine can cause damage and in worst case crack the aluminum

parts in the engine. If the engine has been running, allow it to cool for at least half an hour

before washing.

Drain ScrewDrain Screw

Sediment cup assembly

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Texas Snow King 565 TG in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 2,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Texas Snow King 565 TG Manual

Product: