636752

Texas MULTI CUT 900TG Manual

13
Zoom out
Zoom in
Previous page
1/40
Next page
13
Never use the lock-function on the gasoline gun, when refueling.
Do not smoke while refueling.
Never refuel inside a building or where gasoline fumes may get in contact with an ignition
source.
Keep gasoline and engine away from appliance, pilot lights, barbecues, electric appliances,
power tools, etc.
If the fuel tank has to be drained, this shall be done outdoors
Never store the equipment with petrol in the tank inside a building. This is to ensure that
petrol fumes cannot reach any open flame or ignition source.
Maintenance and storage
The engine shall be stopped when carrying out maintenance and cleaning operations,
when changing tools and when being transported by means other than under its own
power.
Check regularly that all bolts and nuts are tightened. Retighten if necessary.
The engine must be completely cooled before storing indoors or covered.
If the machine unused for a period of time, please refer to the instructions in this manual.
Maintain or replace safety and instruction labels, as necessary.
Only use orginal spare parts or accessories. If not orginal parts or accessories is used,
the liablility is no longer applied.
Always keep the engine, silencer and other parts clean of vegetative material and grease.
This will reduce fire hazard. Replace foulty silencers.
Miscellaneous
The gears are delivered pre-greased. However, always ensure they are well greased
before each use.
The motor is not pre-filled with oil.
Factory-fitted control devices, such as the handle-mounted clutch cable, must not be
removed or exposed.
Only drain the fuel tank outdoors. Gasoline is extremely flammable and the fumes are
explosive.
Replacing or maintenance of belt should be carried out by authorized workshop
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas MULTI CUT 900TG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas MULTI CUT 900TG in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info