636752

Texas MULTI CUT 900TG Manual

12
Zoom out
Zoom in
Previous page
1/40
Next page
12
Replace worn out or damaged elements and bolts in sets to preserve balance.
The operator of the machine is responsible for people’s safety.
Never use the machine near children or animals.
The operator of the machine is held liable for any accidents or hazards to other people and
their property.
Thoroughly inspect the area, where the equipment is to be used, if necessary remove any
foreign objects.
The blades must come to an complete stop before transporting in and out of work area.
The operator must stand opposite the blades during transport
Spilled gasoline is extremely flammable, never refuel while the engine is still hot.
Wipe off any spilled gasoline before starting the engine. It may cause a fire or
explosion!Always wear earmuffs during operation.
Boots with non-slip soles with steel jacket is required. Avoid loose-fitting clothes.
Do not operate the equiment when barefoot or wearing sandals.
Only use original blades, spare parts or accessories. If not original blades parts or
accessories is used, the liability is no longer applied.
The engine on the machines must be turned off during transportation.
The blades must be disengaged during transportation.
It is strictly forbidden to lift the machine when engaged or engine is running
Operation
After striking a foreign object, stop the engine immediately, remove the spark plug cap and
inspect the machine thoroughly for damage. Repair the damage before continuing
If the machine should start to vibrate abnormally, stop the engine and check immediately
for the cause. Vibration is generally a warning of damage.
Always disengage the levers, turn off the engine, and remove the spark plug, when the unit
is left unattended.
Always turn off the engine and ensure that all moving parts have come to a complete stop
before making any repairs, adjustments, or inspections.
Exercise extreme caution when operating on banks and slopes.
Exercise extreme caution when changing direction on banks and slopes
Never operate the machine at a fast pace.
Do not overload machine capacity by attempting to work at too fast a rate.
Do not carry passengers.Pay attention, while the machine is in reverse.
Never allow any bystanders in front of unit.
Always disengage the blades, if not in use.
Only operate the machine at daylight or in fully illuminated areas
Ensure a stable foothold and always keep a firm hold on the handles. Always walk, never
run.Never attempt to make any adjustments, while the engine is running.
Use extreme caution when reversing or pulling the machine backwards
Never operate the engine indoor or in areas with low ventilation. The exhaustion from the
engine contains carbon monoxide. Failure to observe could result in permanent injury or
death.
Gasoline safety
Use extreme care in handling gasoline. Gasoline is extremely flammable and the fumes are
explosive.
Do not refuel gasoline indoors or while the engine is running.
Serious personal injury can occur, when gasoline is spilled on yourself or your clothes.
Rinse your skin and change clothes immediately!
Use only an approved gasoline container. Do not use soft drink bottle or similar!
Extinguish all cigarettes, cigars, pipes and other sources of ignition.
Never refuel your machine indoors.
Let the engine cool down before refilling
Never fill the fuel tank to more than 2.5 cm below bottom of filler in order to provide space
for fuel to expansion.
After refueling, ensure that the cap tighten securely.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas MULTI CUT 900TG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas MULTI CUT 900TG in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info