636724

Texas GTU26S Manual

9
Zoom out
Zoom in
Previous page
1/17
Next page
5
Maintenance and storage
The engine shall be stopped when carrying out
maintenance and cleaning operations, when changing
tools and when being transported by means other than
under its own power.
Check regularly that all bolts and nuts are tightened.
Retighten if necessary.
The engine must be completely cooled before storing
indoors or covered.
If the machine unused for a period of time, please refer
to the instructions in this manual.
Maintain or replace safety and instruction labels, as
necessary.
Only use original spare parts or accessories. If not
original parts or accessories is used, the liability is no
longer applied.
Replace faulty silencers.
Miscellaneous
The gears are delivered pre-greased. However, always
ensure they are well greased before each use.
The motor is not pre-filled with oil.
Factory-fitted control devices, such as the handle-
mounted clutch cable, must not be removed or exposed.
Only drain the fuel tank outdoors. Gasoline is extremely
flammable and the fumes are explosive.
Ensure that the machine is properly secured when
transported on a flatbed etc.
Reduce the throttle during engine shutdown and close
the fuel valve.
Assembly
Please follow the steps in figure:
(Actual model may vary from the illustration shown.)
1. Identification of parts
A. Trimmer line
B. Trimmer head
C. Dead man switch
D. Safety switch
E. Throttle button
F. Trimmer activation lever Grip
G. Engine
H. Connector
I. Protection guard
J. Protection shield
2. Mounting the handle Follow the mounting shown in ill. 2
A.
3. Mounting the upper and the lower part of the trimmer
See ill. number 2 B.
Follow the mounting shown in ill. 2
4. Mounting the protection guard.
Follow the procedure shown in ill. 3
5. Mounting the trimmer head. See ill. 4
Lock the axle with the allen key.
6. For changing the trimmer line follow ill. 5.
Clothing
When using the machine, wear close-fitting work clothes,
hard-wearing work gloves, ear defenders and non-slip boots
with steel toecaps.
Fuel
• This product is equipped with a two-stroke engine
that demands two-stroke oil added to the petrol.
• Always use unleaded gasoline.
• Never use ready-mixed gasoline/oil from service
stations that is normally used for mopeds,
motorbikes, etc.
• Use clean and approved petrol can for mixing the
petrol with oil.
• Use an approved two-stroke oil for air cooled
engines, chainsaws, trimmers etc. (Do not use oil
for out board engines of cars. (Mix only small
quantities).
Mixing instructions
• We recommend the Texas Motex 2tx in a 2.5%
mixture. That means mixing 0.1 l of 2-stroke oil with
4 l of unleaded gasoline.
• Always follow the guidelines of mixture given by oil
manufacturer.
When storing the machine for more than 30 days you
should empty the tank.
Filling of gasoline - Smoking prohibited!
1. Remove the gasoline cap slowly. Place it on a clean
surface.
2. Carefully pour the oil mixed fuel into the tank.
Beware of spilling.
3. Remount the gasoline cap properly.
4. Wipe any spilled fuel.
Notice! Always turn off the engine when refueling. Never
add fuel on a running machine. Always let the engine cool for
2 minutes before refueling. Move more than 3 meters away
from the place where you putted fuel on the engine before it
is started.
Safety warnings
! Mix and store the fuel in approved containers. Mix
the fuel outdoors where there are no sparks or
flames.
! Choose a suitable place, turn off the engine and
leave it to cool for 2 minutes before refueling.
! Remove the gasoline cap slowly in order to ease
gasoline fumes pressure from the fuel tank.
! Wipe any spilled fuel. Move more than 3 meters
away from the fueling site before starting the
engine.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas GTU26S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas GTU26S in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info