Manual Texas BC 335-4 (page 23 of 69) (English, German, Danish, French)

636718

Zoom out

Zoom in

1/69

Starting a warm engine:

Set start switch to "Start" (figure 5.1).

Set choke (figure 2.1).

Pull starter cord until engine starts (figure 2.2).

Stopping engine:

Release throttle (figure 5.4).

Set switch to "Stop" (figure 5.1).

11. Operation.

Always cut high grass from the top and down. This will prevent grass from getting twisted

around the drive shaft and trimmer head, which can cause overheating and damage. If

grass or the like does get twisted around the drive shaft, STOP engine, detach spark plug

lead and remove.

Trimmer

The cord is advanced by tapping the cord housing lightly on the ground while the motor is

running at full speed.

Hold trimmer at an angle towards the area to be cut.

Figure 12 shows the best cutting zone. Always work from left to right.

Use cord to cut. Do not force cord housing into uncut grass. Wire and fences cause

accelerated wear and can break cord. Stones and bricks, curbstones and wood cause very

rapid cord wear. Work around trees and bushes. Bark and wooden ornaments, wood

cladding and posts can be damaged by the cord.

Brushcutter

Figure 13 shows the best cutting zone. Always work from right to left.

12. Air Filter

For correct performance and durability, keep air filter clean.

Remove air filter cover by unscrewing retaining screw.

Clean filter in warm soapy water and allow to dry completely. Soak filter in a little oil.

Squeeze any surplus oil out. If filter is very worn, replace.

Fit filter and cover. Check filter and cover are properly fitted.

Clean filter every 5 hours of operation, more frequently if working in dusty conditions.

13. Spark Plug

This machine is equipped with an NHSP AL6RC spark plug which has a gap of 0.6 mm 0.7

mm. Replace annually for optimum performance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Texas BC 335-4 in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Texas BC 335-4 Manual

Product: