636718

Texas BC 335-4 Manual

20
Zoom out
Zoom in
Previous page
1/69
Next page
20
4. Fitting Screen and Handle
Fit screen using screws supplied. Check screen is secure.
See figure 3.
Fit handle and ensure machine is balanced. Also make sure the machine is comfortable to
use for the user.
See figure 4.
5. Switch from Trimmer to Brushcutter
Removing trimmer head – figures 16, 17.
1. Insert the Allen key (1) provided into trimmer gear hole and bushing (a) to secure
the shaft.
2. Unscrew twine head clockwise.
Note! Keep trimmer head parts together for later use.
Fitting blade – figures 6, 7, 8
1. Insert the Allen key (1) provided into trimmer gear hole and bushing (a) to secure
the shaft.
2. Mount the blade (b) on the bushing (a), making sure that the projection on the
bushing fits in the blade’s fitting hole.
3. Fit the washer (c) and cup (d) against the blade, and finish by fitting the lock ring (e)
and nut (f). Make sure the washer is facing the proper direction (flat side against
blade).
4. Remove the allenwrench before use.
Always ensure blade is secure. If in doubt, contact your nearest dealer.
Using the blade
1. Keep blade in dense grass or weeds when stopping engine until rotation has
ceased.
2. Always hold machine securely in both hands.
3. Do not use if screen is incorrectly fitted and in poor condition.
4. Always stop engine before removing any materials stuck in blade.
5. Never attempt to touch or stop blade while it is rotating.
6. A rotating blade can cause injury, as it will continue to rotate after the engine is
stopped or gas regulator activated. Always maintain control over the machine until
blade stops completely.
7. Always ensure blade is correctly fitted before use.
8. Always use a sharp blade. Replace damaged or worn blades.
9. Use original spare parts only.
10. Use blade only for weeds, grass and the like.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Texas BC 335-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Texas BC 335-4 in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info