703876
20
Zoom out
Zoom in
Previous page
1/24
Next page
20 • US 6112/6 RHD
Dimmer
You can adjust the brightness of the display panel
with the button 38 “Dimmer”. The display brightness is
adjusted every time you push the button: bright, medium,
dark, off.
Equalizer
As with the menu function (see page 16), this provides
you with ultra fi ne sound adjustment in nine frequency
ranges.
Possible values: each from –20 dB (decrease) to +6 dB
(increase).
Push the button 42 “Equalizer”.
Select the desired channel by pushing the button 42
“Equalizer” several times or by using the navigation
buttons 31
/
Push the button 41 “•”.
Select the desired frequency with the navigation but-
tons 31
/
and set the level from -20 dB (decrease)
to -20 dB (increase) with the buttons 31
/
”.
Push the button 32 “Return” to exit the setting.
Note: The equaliser is inactive with some high-defi nition
formats.
Tone/LipSync
You can set the sound and the audio delay with the but-
ton 30 “Tone/LipSync.
Adjusting the sound
By briefl y tipping the button 30 “Tone/LipSync” you can
access the two sound adjustment areas in sequence: Bass
(low tones), Treble (high tones)
You can now set the selected range from –10 dB to
+10 dB with the navigation buttons 31
/
”.
Push the button 32 “Return” to exit the setting.
Setting audio delay
Pushing and holding the button 30 “Tone/LipSync” for
more than one second allows you to set the value for the
audio delay (see the “Lip Sync” menu function on page
16) for the active input:
The current value in milliseconds (ms) is shown in the
display panel and on the screen.
With the buttons 31
/
” set the audio delay from 0
to 100 ms.
Push the button 32 “Return” to exit the setting.
Direct
In direct mode, the audio signal is emitted without sound
adjustment.
Brie y pushing the button 39 “Direct” displays the cur-
rent setting:
Direct OFF – Normal mode with sound adjustment
Direct Mode – Direct mode without sound adjustment
Tipping the button 39 “Direct” again switches the
mode.
Info
Pushing the button 40 “Info” displays information on the
current audio signal on the screen and in the display pan-
el for approx. three seconds, e.g. “48KHz 2.1 Stereo”.
Sleep
You want to fall asleep in your comfortable home cin-
ema? This automatic sleep function will help by turning
the subwoofer off after a preset time (max. 60 minutes).
Push the button 24 “Sleep” briefl y to display the sleep
mode status:
“Sleep Mode OFF” – Function disabled.
“Timing xxmin” – Will be deactivated in xx minutes.
With the navigation buttons 31
/
, select the
desired time for activating sleep mode from 15 to 60
minutes.
Push the button 32 “Return” to exit the setting.
The system will power down automatically after the
preset time has elapsed.
30
31
3240
41
42
39
91796 GB 20120524.indd 2091796 GB 20120524.indd 20 24.05.12 16:0324.05.12 16:03
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel US 6112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel US 6112 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info