703876
18
Zoom out
Zoom in
Previous page
1/24
Next page
18 • US 6112/6 RHD
Distance
The surround sound effect may be disrupted if the speak-
ers are positioned at different distances to the listening
position. To compensate for these differences in run
time, you can set a slight signal delay for all channels.
Measure the difference from the listening position to the
speakers and enter these values in the menu.
“System configuration” menu
HDMI
CEC (Consumer Electronics Control)
If this function is activated (ON), CEC-compatible devices
are powered up and down by a control command via the
HDMI connection.
ARC (Audio Return Channel)
With a HDMI connection this channel offers a return
channel for audio data from television sets that support
this function. This allows the audio signal to be transmit-
ted from the television set to the subwoofer’s amplifi er
without having to connect another cable. With the ARC
function activated, select the television audio with the
button 25 Coax 1.
Possible settings: OFF, ON.
Important!
Please note that many television sets only have
one HDMI input that supports the ARC function.
An activated CEC function is required for the ARC function.
Note: When the CEC-Function is activated, standby
power consumption is increased.
Standby mode
You can activate automatic activation and deactivation
with this:
Auto On The subwoofer turns on as soon as an au-
dio signal is detected at the analogue input
Aux 1. “Aux 1” is automatically selected
as an active source in the process.
Auto On/Off Same as above, but the subwoofer
switches to standby once no signal has
been present at the “Aux 1” input for a few
minutes.
Off Automatic activation/deactivation is not
activated.
Activation level
Here you can set the volume of your device when it is
turned on:
last: The last volume set when powered off.
• fi xed: You set the volume from -70 dB (low) to +10 dB
(very loud).
5.1/7.1
This allows you to switch between 5.1 and 7.1 mode and
set the function of the analogue output 11 “RC/Pre Out”
(also see “Analogue audio output” on page 10), which
you can connect to a stereo amplifi er, active speakers or
a wireless transmission system. This makes it possible to
project sound into another room or to connect to the rear
speakers in 5.1/7.1 mode with a wireless transmission
system (such as the Teufel RearStation 4).
5.1+2ch Convert the 5.1 audio signal to two stereo
channels (2.0); volume is adjusted accord-
ing to master level.
5.1+2ch fi x Same as before, but without volume adjust-
ment.
5.1+Surr 5.1 mode with emission of the effect chan-
nels (surround).
7.1 7.1 mode with emission of the rear chan-
nels (rear).
D/E
You can set the screen menu language this way. Possible
values: German, English
System Reset
This resets the device to the factory default.
91796 GB 20120524.indd 1891796 GB 20120524.indd 18 24.05.12 16:0324.05.12 16:03
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel US 6112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel US 6112 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info