Manual Teufel Impaq 8000 (page 23 of 52) (English)

686244

Zoom out

Zoom in

1/52

23 • Impaq 8000

Menu “Audio mapping”

You can assign the audio inputs to the HDMI inputs

here: Would you like to connect your PC or a source

with DVI picture output via HDMI, but the sound

card or the device only emit the sound via an optical

output?

Your Impaq 8000 can do this: Select the desired

HDMI input and configure the desired audio input on

the far right of the menu, which is “Optical” in this

case.

Menu “Language”

You can set the language for the system menus and

for the playback of DVD/BD here.

• OSD – language of the system menus

• Disc menu – language of the DVD/BD menus*

• Disc audio– language of the DVD/BD audio tracks*

• Disc subtitles – language of the DVD/BD subti-

tles*. The setting “None” deactivates the subtitles.

*) if available in the desired language

Menu “Network”

Setting the network and Internet options.

“Information”

Provides an overview of current settings. All values

can be configured manually under “ IP setting” (see

below).

“Connection test”

With this function, the Impaq 8000 checks whether

there is a network connection and whether the Inter-

net is available. “Successful” or “Connection error”

will appear after completion, then push OK (26).

“Internet connection”

Switches the network connection on and off.

• Active – The network is switched on.

• Standby –

The network is switched off. No network

settings are possible in this case as well.

“Connection type”

Determines the type of network connection:

• Hard-wired – the Impaq 8000’s jack LAN(11) is

connected to a network/router via an Ethernet

cable .

• Wi-Fi – The Teufel WiFi Link USB adapter is fitted in

one of the USB ports (6) or (14), which establishes

a WLAN connection to the network.

Notice: A special Wi-Fi USB stick is needed that you

can purchase separately in our web shop (www.

teufelaudio.com).

“IP setting”

Define the network settings.

Automatic – automatically determines the required

parameters. Prerequisite: An active DHCP server (e.g.

a router).

Manual – The IP address and all other values must

be configured. Only a qualified expert should config-

ure these settings. Use the number buttons 1...0 (22)

for input.

• IP address: The network address for the receiver

consisting of four numbers each between 0 and

255, e.g. 192.168.001.100.

• Subnet mask: Based on the network mask, the

receiver detects which addresses it reaches on

its own network and which it only reaches via the

gateway (router). Consists of four numbers, each

between 0 and 255, e.g. 255.255.255.0.

• Standard gateway: Network address of the gate-

way (router), which establishes the connection to

the Internet.

• DNS1: Network address of the primary domain

name server (DNS), which locates the correspond-

ing IP address for domain names (e.g. www.teufe-

laudio.com). Comparable with a phone book.

• DNS2: As before, is used when the primary DNS

fails. This specification is optional.

“Wi-Fi setting”

Here, you can set the settings for the wireless network

(Wi-Fi).

The Wi-FI menu is only available if the entry “Wi-Fi”

was previously enabled in the “Connection type”

menu (see above).

An error message will appear if the Teufel WiFi Link

USB adapter is not connected.

– Push the OK button (26) to access the previous

menu.

Once the menu is accessed, a warning will appear

that the existing network connection will be interrupt-

ed.

Select “Yes” and push the OK button (26).

The next menu offers three options:

• Search – Displays all existing Wi-Fi base stations

with a corresponding selection.

Settings

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Impaq 8000 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teufel Impaq 8000

Teufel Impaq 8000 User Manual - German - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teufel Impaq 8000 Manual

Product: