704029
13
Zoom out
Zoom in
Previous page
1/16
Next page
• DecoderStation 5 13
Special function buttons
Surround
You can switch to surround mode in the following order
with the “MODE” button 23:
2.1 Stereo Stereo only via front left/right and
subwoofer
5.1 Stereo Stereo across all channels (upmix)
Dolby PLII Music Dolby Pro Logic II Music mode
Dolby PLII Movie Dolby Pro Logic II Movie mode
DTS NEO:6 Music DTS NEO:6 for music
DTS NEO:6 Cinema DTS NEO:6 for cinema
Some options may not be available if not all satellite
speakers are connected.
Dolby
Digital and DTS
When Dolby Digital or DTS-encoded multichannel are
played back, this button is disabled.
Test tone
With this function, you can monitor and set the correct
level for each speaker channel.
Push the “TEST” button 17. A test sound (“pink noise”)
will be emitted on each speaker one by one.
You can adjust the volume of the currently active chan-
nel from “–10” to “+10” using the volume buttons 22
“VOL +/–”.
Select the next channel with the navigation buttons 20
/▶.
To stop the test sound, push the “RETURN” button 16.
We recommend using a Teufel sound-level meter, which
you can order on our website in the accessories area.
Channel level buttons
Here you can increase and decrease the relative volume
for each speaker, even during playback.
Select the desired speaker by pushing the button 21:
Front L. – Front left
Center – Centre
Front R. – Front right
Side L – Surround left
Sub – Subwoofer
Side R – Surround right
You can now adjust the relative volume from “10” to
+10” using the volume buttons 22 “VOL +/–”.
To exit the function, push the “RETURN” button 16.
Tone/LipSync
With the “Tone/LIPSYNC” button 18, you can adjust the
sound and audio delay.
Adjusting the sound
Briefly tap the “TONE/LIPSYNC” button 18 to access two
audio control ranges successively: Treble (high tones),
bass (low tones, bass tones).
Now select the range from “–10” (decrease) to “+10”
(increase) with the volume buttons 22 “VOL +/–”.
Confirm the setting by pushing the button 16 “RE-
TURN”.
Setting audio delay
Push the button 18 “TONE/LIPSYNC” for more than one
second to set the value for audio delay (see the “LIP-
SYNC” menu function on page 12):
The current setting in milliseconds (ms) appears in the
display panel.
Set the audio delay from 0 to 200 ms with the volume
buttons 22 “VOL +/–”.
Push the button 16 “RETURN” to confirm the setting.
16
17
18
20
21
22
23
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Columa 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Columa 250 in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teufel Columa 250

Teufel Columa 250 Additional guide - English - 8 pages

Teufel Columa 250 Additional guide - English - 8 pages

Teufel Columa 250 User Manual - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info