704025
13
Zoom out
Zoom in
Previous page
1/28
Next page
• CP 5100 DR 13
Menu functions
51
50
41
40
With the menu, you can set most functions of your
CP 5100 DR. You control the menu with the remote con-
trol; the menu itself is shown on the connected TV screen.
Important
The menu functions are only available if “DISC”
is selected as source.
Both devices must be turned on and the CP 5100 DR
picture must be visible on the television.
Press the button 50 “DVD” to select “DISC” as the source.
Press the button 51 “Setup. The main menu will ap-
pear on the screen.
Select the desired submenu with the navigation buttons
40▲▼ ” and press the select button 41” or the
navigation button 40. A submenu will appear.
You can open other submenus in this way and change
settings.
Press the navigation button 40” to return to the
previous menu.
You can exit at any time by pressing the button 51
“Setup.
If the menu appears in German (“Beenden” instead of
“Exit“), change the language to English:
Select the item “System” with the navigation buttons 40
▲▼ ” and press the select button 41” or the naviga-
tion button 40”.
Press the select button 41” or the navigation button
40” to access the “Sprache” submenu.
Press the select button 41” or the navigation button
40” again to access the submenu “OSD-Me.
Select the item “Englisch” with the navigation buttons
40▲▼ ” and press the select button 41. The menu
will change to English.
Press the navigation button 40” until only the main
menu is visible.
MenuVideo
Aspect Ratio
Adjusting the display on the television:
4:3 Pan Scan – 16:9 movies are shown with the full height
on a 4:3 TV-set, but the sides are cropped.
4:3 Letterbox – 16:9 movies are shown with full width on
a 4:3 TV set with black bars on the top and bottom.
16:9 Wide – Correct setting for 16:9 TV-sets.
Video
Audio
System
Exit
TV Format”
Adjusting the transmission encoding system for the con-
nected television:
NTSC – American standard
PAL – European standard
If in doubt, consult the operating instructions of your
television.
HD-Resolution
Setting the resolution for HD playback. Possible values:
480p/576p, 720p, 1080i, 1080p
You can also adjust these settings with the special func-
tion button “Resolution” (see “Special function buttons” on
page 16).
Video Output
Activating the analog video output:
SCART – Connection to the jack 15 “SCART” in standard
resolution via a SCART cable.
Component I – Connection to the component output 16
“Component” with normal resolution (interlaced compo-
nent).
Component P – Connection to the component output 16
“Component” with higher resolution ( progressive compo-
nent).
If in doubt, consult the operating instructions of your
television.
The outputs 26 “S-Video”, 27 “Composite” and 28
“HDMI” are always active.
Lip Sync”
Digital image-processing in the TV-set requires a certain
amount of time. To keep the image and sound in sync,
televisions delay the sound by a few milliseconds. To en-
sure that the sound of your DVD receiver is also in sync,
you can set the receiver’s audio delay from 0 to 250 ms
here. For this, move the marker on the scale using the
navigation buttons 40▲▼ ” and change the value using
the select button 41. You can also change this setting
with the button 38Audio” (see page 16).
91341 GB 20100924.indd 1391341 GB 20100924.indd 13 24.09.2010 9:58:07 Uhr24.09.2010 9:58:07 Uhr
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Cinepaq 6900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Cinepaq 6900 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info