704023
16
Zoom out
Zoom in
Previous page
1/28
Next page
16 • CP 5100 DR
Special function buttons
45
46
37
38
Button “ Audio”
With the button 38Audio, you can set the ambient
sound or the surround mode and the audio delay.
Setting ambient sound
Pushing the button 38Audio” briefl y switches to the
respectively possible modes:
If only two speakers (front left and right) are active, you
switch the Dolby® Virtual Speaker (DVS) each time you
push the button:
DVS REF Normal DVS ambient sound.
DVS WIDE” Extended DVS ambient sound.
DVS OFF” Deactivate DVS.
If all speakers are active, two ProLogic and two stereo
settings are available for all dual-channel sources:
PLII MovieDolby® ProLogic II for movies.
PLII MUSICDolby® ProLogic II for music.
STEREO 5” Stereo playback on all speakers.
STEREO 2” Stereo playback only on the front speakers
left and right and the subwoofer.
The surround mode is preset when Dolby Digital or DTS
coded multi-channel tracks are played back; as a result,
this function is blocked.
Setting audio delay
By pushing the button 38Audio” for more than two sec-
onds, you can set the value of the audio delay (see menu
function “Lip Sync” on page 13):
The current value in milliseconds (ms) is shown in the
display panel and on the screen.
With the volume buttons 37 “Volume +/–”, you can
now set the audio delay within the range from 0 to
240 ms.
The device deactivates the function after three seconds of
button inactivity.
Button “ Level
You can set the sound with the button 45 “Level” and
adjust the volume of the speakers.
Adjusting the sound
By briefl y pushing the button 45 “Level”, you access the
three ranges for the sound control in sequence:
Bass low tones (bass tones)
Treble high tones
Middle medium-range tones (language)
With the volume buttons 37Volume +/–” you can now
set the selected range from “10” (decrease) to “+10”
(increase). After three seconds of button inactivity, the
device switches off the function.
Volume adjustment.
You can increase or decrease the relative volume for
each speaker. First push and hold the button 45 “Level”
for more than two seconds until the fi rst speaker channel
is displayed in the display panel and on the top left of the
screen (see below). Tip the button 45 “Level” to select the
desired speaker now:
FRONT L – Front left
CENTER – Center
FRONT R – Front right
REAR L – Rear left
REAR R – Rear right
SUB – Subwoofer
With the volume buttons 37Volume +/–” you can now
set the volume within the range from “–10” to “+10”. After
three seconds of button inactivity, the device deactivates
the function.
Button “ Resolution”
By tipping the button 46 “Resolution” you can set the
resolution of the television set for HD playback. Possible
values:
HDMI 576P, HDMI 720P, HDMI 1080I, HDMI 1080P.
91341 GB 20100924.indd 1691341 GB 20100924.indd 16 24.09.2010 9:58:08 Uhr24.09.2010 9:58:08 Uhr
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Cinepaq 5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Cinepaq 5100 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info