704023
10
Zoom out
Zoom in
Previous page
1/28
Next page
10 • CP 5100 DR
AM antenna
The enclosed antenna
is designed for receiving me-
dium wave stations (AM). You can set up this antenna to
be free standing or screw it onto a cabinet or wall.
14
Connect the antenna cable with the jacks 14AM” on
the back of the DVD receiver. Push down the lever on the
terminal and run the cable end into the above opening.
Releasing the lever will hold the cable in place.
Television/projector
You can connect a television and/or projector to the fol-
lowing outputs:
15 28 27 26 16
15 SCART
Analog video signal (RGB, composite (CVBS) and S-
Video) and audio signal (stereo) via a SCART cable. The
SCART connection must be activated via the video menu
(see “Video output”, page 13).
16 Component
Analog component video signal (YPbPr) via a three-line
RCA cable. When connecting, observe the jack colour
coding (green, blue and red). This output also has to be
activated via the video menu (see “Video output”, page
13).
26 S-Video
Analog video signal (S-Video) via a mini-DIN cable (also
referred to as Hosiden cable).
27 Composite
Analog video signal (FBAS) via an RCA cable. A video
cable
with two yellow RCA jacks is included with the
CP5100 DR, which you can use to connect a television to
this jack.
28 HDMI Out
Digital video and sound signals via a HDMI cable.
Preferably, you should use the HDMI output 28 to connect
your screen as the signals of the HDMI inputs 1 and 2
are relayed to this output only. If connecting the TV via
one of the other outputs, the HDMI inputs cannot be used.
Inputs for Source devices
The CP 5100 DR offers three inputs for analog sources
(Aux 1 – 3) and two digital HDMI sources. There are also
two optical and two coaxial digital sound inputs availa-
ble that you can freely assign to the source devices using
the setup menu (see page 14).
17 Aux 1
Here, you can connect a source with
an analog component signal (YPbPr)
and analog sound. For this, you will
need a triple RCA cable for video (Y,
Pb und Pr) and a double RCA cable
for the sound (L and R).
18 Aux 2 and 19 Aux 3
Here, you can connect a source with analog video and
sound. The video signal can be transferred as FBAS
(Composite) with a RCA cable or as S-Video with a mini
DIN cable. You will need a double RCA cable for the
audio signal (L and R).
91341 GB 20100924.indd 1091341 GB 20100924.indd 10 24.09.2010 9:58:02 Uhr24.09.2010 9:58:02 Uhr
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Cinepaq 5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Cinepaq 5100 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info