716831
34
Zoom out
Zoom in
Previous page
1/38
Next page
34
t
Maintenance and Cleaning
Your grill is made of high-quality materi-
als. To clean and maintain the surfaces,
please heed the following instructions:
Danger Risk of burning!
Let the grill cool down complete-
ly before cleaning.
Empty the ashes once the fuel has
burned down completely and is out.
Danger Health hazard!
Do not use any paint solvents or
thinners to remove stains. Such
liquids are hazardous to health
and may not come into contact
with food.
Attention Risk of damage!
Do not use any strong or abrasive
solvents or scouring pads as
such products attack the grill‘s
surfaces and leave permanent
markings.
• Let the fuel burn out completely after
grilling. This makes the cleaning easier
as any excess fat and barbecue resi-
dues burn away.
• Empty out the cold ash and clean the
grill regularly, preferably after every
use. It is very important that you
remove the ash from the grill body
before any moisture combines with
the cold ash. Ash is saline and, in
a moist condition, it will damage
the inside of the grill body. If this
happens regularly over years, the
grill body can sustain damage
through rust.
• Remove the cooking grate and clean
it thoroughly with soapy water. Wash it
with clean water and then dry the grate
carefully.
• Rub the cooking grates and the char-
coal grates with vegetable oil (a thin
layer) after cleaning.
• Use a wet sponge to remove loose res-
idue from the grill.
• Use a soft, clean cloth for drying. Do
not scratch the surfaces when wiping
them dry.
• Clean the inner and outer surfaces with
warm soapy water as a general prac-
tice.
• Tighten all bolts before every use to
ensure that the grill stands stable at all
times.
• Protect the grill from ongoing weather
effects. Since it has been made of
steel, it will one day develop some cor-
rosion. If this happens, rub the rusty
spots clean and cover them with a
heat-resistant paint.
• NOTE: Your grill will develop a patina
after some time of use. If you do not
like this rusty look, you can proceed as
follows: Remove the rust using a wire
brush or a rust removing gel. Then
apply an oven lacquer to the surface
(heat resistant to at least 600°C). Then
your smoker will look like new again.
• I M PORTA NT: Always store the grill in
a dry place, protected from moisture.
P180143-TEPRO-1049-Milwaukee-Smoker_GB_20180720.indb 34 20/7/2018 3:59 PM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tepro 1049 - Milwaukee at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tepro 1049 - Milwaukee in the language / languages: English, German as an attachment in your email.

The manual is 3,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info