742919
90
Zoom out
Zoom in
Previous page
1/96
Next page
88
Step 2 Select the Enable Auto Reboot check box.
Step 3 Set Reboot Mode to At specified time.
Step 4 Select the day or days when the AP reboots.
Step 5 Set the time when the AP reboots, such as 23:59.
Step 6 Click Save.
---End
9.8 LED Control
This function enables you to turn on/off the LED indicator of the AP. By default, the LED indicator is turned on.
Procedure for turning off the LED indicator
Step 1 Choose Tools > LED Control.
Step 2 Click Turn Off All Indicators.
---End
Procedure for turning on the LED indicator
Step 1 Choose Tools > LED Control.
Step 2 Click Turn On All Indicators.
---End
9.9 Uplink Detection
9.9.1 Overview
In AP mode, the AP connects to its upstream network using the LAN0 port. If a critical node between the LAN0
port and the upstream network fails, the AP as well as the wireless clients connected to the AP cannot access the
upstream network. If uplink detection is enabled, the AP regularly pings specified hosts through the LAN0 port. If
all the hosts are not reachable, the AP stops its wireless service and wireless clients cannot find the SSIDs of the
90


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda W6-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda W6-S in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info