742919
69
Zoom out
Zoom in
Previous page
1/96
Next page
67
Parameter
Description
beacon frame is transmitted.
Min. RSSI
Threshold
It specifies the minimum strength of received signals acceptable to the AP. If the strength of
the signals transmitted by a wireless device is weaker than this threshold, the wireless device
cannot connect to the AP.
If there are multiple APs, an appropriate value of this parameter ensures that wireless clients
connect to the APs with strong signals.
Transmit Power
It specifies the transmit power of the AP. This parameter can be set if Lock Power is not
selected.
A greater transmit power of the AP offers broader network coverage. You can slightly reduce
the transmit power to improve the wireless network performance and security.
Lock Power
It specifies whether the current transmit power settings of the AP can be changed. If it is
selected, the settings cannot be changed.
Preamble
It specifies whether to use long preamble or short preamble. A preamble is a group of bits
located at the beginning of a packet to enable a receiver of the packet to perform
synchronization and prepare for receiving data.
By default, the Long Preamble option is selected for compatibility with old network adapters
installed on wireless clients. To achieve better synchronization performance of networks,
you can select the Short Preamble option.
7.5 Access Control
7.5.1 Overview
It specifies, based on MAC address filter rules, the wireless devices that can or cannot access the wireless
networks of the AP.
The AP supports the following MAC address filter rules:
Disable: It indicates that access control is disabled. In this case, all wireless devices can access the
wireless networks of the AP.
Allow: It indicates that only the wireless devices with the specified MAC addresses can access the
wireless networks of the AP.
Disallow: It indicates that only the wireless devices with the specified MAC addresses cannot access
the wireless networks of the AP.
7.5.2 Configuring Access Control
Step 1 Choose Wireless > Access Control.
Step 2 From the SSID drop-down list box, select the SSID of the wireless network on which access control
must be implemented.
Step 3 Select an access control mode from the MAC Filter Mode drop-down list box.
Step 4 If you select Allow or Disallow, enter the MAC addresses to control in the access control list and click
Add.
If a wireless device to be controlled has been connected to the AP, you can click Add corresponding to
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda W6-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda W6-S in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info