742919
68
Zoom out
Zoom in
Previous page
1/96
Next page
66
---End
Parameter description
Parameter
Description
Beacon Interval
It specifies the interval for transmitting the Beacon frame. The value range is 20 to 999. The
unit is millisecond.
The Beacon frame is transmitted at the specified interval to announce the presence of a
wireless network. Generally, a smaller interval enables wireless clients to connect to the AP
more quickly, while a larger interval ensures higher data transmission efficiency.
Fragment
Threshold
It specifies the threshold of a fragment. The value range is 256 to 2346. The default value is
2346. The unit is byte.
Fragmenting is a process that divides a frame into several fragments, which are transmitted
and acknowledged separately. If the size of a frame exceeds this threshold, the frame is
fragmented.
In case of a high error rate, you can reduce the threshold to enable the AP to resend only the
fragments that have not been sent successfully, so as to increase the frame throughput.
In an environment without interference, you can increase the threshold to reduce the
number of acknowledgement times, so as to increase the frame throughput.
RTS Threshold
It specifies the frame length threshold for triggering the RTS/CTS mechanism.
If a frame exceeds this threshold, the RTS/CTS mechanism is triggered to reduce conflicts.
The value range is 1 to 2347. The unit is byte.
Set the RTS threshold based on the actual situation. An excessively small value increases the
RTS frame transmission frequency and bandwidth requirement. A higher RTS frame
transmission frequency enables a wireless network to recover from conflicts quicker. For a
wireless network with high user density, you can reduce this threshold for reducing conflicts.
The RTS mechanism requires some network bandwidth. Therefore, it is triggered only when
frames exceed this threshold.
DTIM Interval
It specifies the interval for transmitting the Delivery Traffic Indication Message (DTIM) frame.
The value range is 1 to 255. The unit is Beacon. A countdown starts from this value. The AP
transmits broadcast and multicast frames in its cache only when the countdown reaches
zero.
For example, if DTIM Interval is set to 1, the AP transmits all cached frames after each
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda W6-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda W6-S in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info