742909
79
Zoom out
Zoom in
Previous page
1/177
Next page
User Guide
131
Field
Description
STP Status
Select to enable/disable the STP feature or make
no change. By default, the STP feature is
disabled. To activate the STP feature, you must
enable STP both globally on the entire device
and specifically on desired port(s).
Edge Port
An edge port is a port that is connected to the
terminal directly. Ports that are designated as
edge ports transit rapidly from the blocked state
to the forwarding state without delay. An edge
port loses its status if it receives a BPDU packet,
immediately becoming a normal spanning tree
port. By default, all ports are edge ports.
P2P Port
A P2P port is also capable of rapid transition.
Under RSTP/MSTP, all ports operating in
full-duplex mode are considered to be P2P ports.
By default, port establishes a link automatically.
Instance ID
Configure port parameters under different
instances.
Priority
By default, the port priority is set to 128.
Default Path
Cost
Enable/disable port default path cost. You can
specify a custom port path cost between 1 and
200,000,000 if you disable the default port path
cost. When enabled, port path cost can be
configured automatically and 802.1at is
supported.
Port Path Cost
The default path cost is 200,000,000. Only if you
disable the default path cost option, can path
cost be configurable.
To config STP settings on a batch of ports concurrently, click Config as seen below:
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3224P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3224P in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info