742908
81
Zoom out
Zoom in
Previous page
1/139
Next page
76
Advanced
Settings
STP Status
Enable/Disable STP feature on ports.
By default, the STP feature is disabled. Enabling global and port STP
feature makes port STP feature effective.
Priority
Configure port priority, which is an important for selecting root port.
Under the same conditions, the port with higher priority will be selected
as the root port. The smaller the value is, the higher its priority is. The
default value is 128 with a valid range of 0~240.
Default Path
Cost
Enable/Disable port default path cost. You can customize the port path
cost between 1 and 200,000,000 if you disable the default port path
cost. When enabled, port path cost can be configured automatically
and is 802.1t-compliant.
Path Cost
The default path cost is 200,000,000.
Tip:
Only if you disable the default path cost option, can path cost be
configurable.
Edge Port
Select to enable or disable Edge Port. An edge port is a port that is
connected to the terminal directly. Ports that are designated as edge
ports transit rapidly from the blocked state to the forwarding state
without delay. An edge port loses its status if it receives a BPDU
packet, immediately becoming a non-edge port. By default, all ports are
edge ports.
P2P Port
Select P2P link status for ports. If two ports are connected in P2P link,
and they are root ports or designated ports, they can be rapidly
transited to forwarding status, reducing unnecessary forwarding delay
time. Under RSTP/MSTP, all ports operating in full-duplex mode are
considered to be P2P ports. By default, port establishes a link
automatically.
2.3 STP Port Statistics
Click Device Management > STP > STP Port Statistics to refresh and clear BPDU
packets ports have received and sent.
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3210P in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info