742908
79
Zoom out
Zoom in
Previous page
1/139
Next page
74
Advanced
Settings
STP Status
Enable/Disable STP feature on this device.
By default, the STP feature is disabled.
STP Version
Select the desired version of STP version.
STP: Spanning-tree-compliant mode.
RSTPRapid-spanning-tree-compliant mode.
BPDU
Processing
Select a BPDU processing method when STP is disabled on this
device.
Broadcast: Broadcast BPDU packets. This is the default option.
Filter: Filter BPDU packets.
Priority
Configure priority for this switch. Priority is an important factor for root
bridge. Under the same conditions, the switch with the higher priority
will be selected as the root bridge. The smaller the value is, the higher
the priority is. The Bridge priority default is 32768 and can only be
configured in multiples of 4096.
Max Age
Configure a max aging time for BPDU packets to live. The default
value is 20s. Max Age should meet below requirements:
Max Age >= 2 * (Hello Time + 1);
Max Age <= 2 *(Forward Delay - 1).
Hello time
Configure the BPDU sending interval. The default value is 2s.
Forward
Delay
Configure the delay time of port status transition when network
topology changes. The default is 15s.
Specify Root
Bridge
Display relevant info of STP feature.
2.2 STP Port Setup
Click Device Management > STP > STP Port Setup to configure STP parameters on all
ports.
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3210P in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info