742908
13
Zoom out
Zoom in
Previous page
1/139
Next page
8
Installation
3Inductive Lightning Protection
In case that strong current does damage to the switch due to inductive lightning, verify
that:
Power socket, rack, work bench and the grounding terminal of the switch are
well-grounded;
The switch is cabled properly. When the switch is cabled outdoors, it is advisable to
use it together with the signal lightning arrester.
4. Installation Site Requirements
Whether install the switch in a rack or on a flat work bench, please verify:
The rack or work bench is stable and sturdy enough;
The switch should be clean and well ventilated. There is at least 10 centimeters free
on all sides for cooling;
No articles, especially heavy articles, are placed on the switch;
There is more than 1.5 centimeters vertical distance free between devices that stack
up.
2 Tools
Before installing the switch, prepare the following tools:
Antistatic Gloves Phillips Screwdriver Ethernet Cable
3 Installation
The switch can be installed either in a rack or on a desktop. You can choose the more
suitable one as you need.
A. Mount the switch in a rack
With the included L-shaped brackets and screws, you can install it in a 19-inch standard
rack.
Step 1: Make sure the rack is well-earthed and stable;
Step 2: Attach the included mounting brackets to the two sides of the switch with the
included screws;
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3210P in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info