742908
12
Zoom out
Zoom in
Previous page
1/139
Next page
7
Installation
1 Installation Considerations
To avoid any equipment damage or bodily injury caused by improper use, read the
following safety recommendations before installing the switch. Note that the
recommendations do not cover every possible hazardous condition.
Safety Caution
Do wear anti-static wrist straps and disable the power supply of this device while
installing this device;
Use the included power cord for power supply;
Ensure operating power supply accords with rated input standard;
Ensure ventilation holes of the switch are in good condition;
Do not open or remove the housing of the switch;
Do disconnect power supply while cleaning the switch and do not use any liquid to
clean the switch;
It's suggested to ground the switch to avoid strong inductive lightning. Keep the
switch away from power lines, electric lights or strong power grid or anywhere the
power grid with strong current is reachable, all for better performance.
Note:
There is a Tenda seal on one of the screws. You should keep the seal unbroken before the
technical staff maintains your switch. You cannot open the housing of the device unless
you get the local reseller’s permission, or you have to be responsible for the result that the
device cannot be maintained because of unpermitted operation.
Site Requirements
1. Temperature & Humidity
Environment
Temperature
Humidity
Operating
-10ºC ~ 45ºC
10% ~ 90%RH (non-condensing)
Storage
-40 ~ 70
5%~90% RH (non-condensing)
2. Cleanliness Requirements
In case that static electricity affects this devices normal operation, please observe
following guidelines:
Keep indoor environment clean and dust the switch regularly;
Keep the switch well-grounded for electrostatic transferring.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3210P in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info