629388
17
Zoom out
Zoom in
Previous page
1/28
Next page
Access via level 1 „Main menu“ and and „Settings“
Receiver control: With this menu option you can configure the optional settings
for the system control by the receiver. By selecting the mode, you can determine if
and how the system is started by the receiver.
Receiver control
Mode 1 „Auto off“ (default setting)
l This mode is recommended for receivers that never switch off the LNB
voltage, or if you wish that the receiver shall not control the antenna.
l The system can then be switched on and off only at the Sat button of the
control device.
Mode 2 „Auto Stby“
l This mode is recommended if the LNB voltage is switched off when the
receiver is in standby mode.
l The system can be switched on and off via the satellite receiver and at the
Sat button of the control device.
l The receiver is switched on. Depending on the model, a receiver may need
up to three minutes to boot. The antenna will open only after this boot
period to search for the satellite.
l The receiver is switched off: The antenna closes and switches into standby
mode.
Mode 3 „Auto Sleep“
l This mode is recommended if the receiver does not provide voltage to the LNB
when in standby mode.
l The system can be switched on and off via the satellite receiver and at the
Sat button of the control device.
l The receiver is switched on: If the antenna was closed, it will open and
search for the satellite selected. If the antenna was already open, it will
remain in this position. If no signal is received in this position, the system
will search for the satellite selected.
l The receiver is switched off: The system switches into standby mode with
the antenna remaining in its current position (sleep mode).
l In „Auto Sleep“ mode the antenna can be closed by pressing the Sat button
of the control device.
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ten Haaft Oyster Vision III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ten Haaft Oyster Vision III in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ten Haaft Oyster Vision III

Ten Haaft Oyster Vision III User Manual - German - 28 pages

Ten Haaft Oyster Vision III User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info