681319
48
Zoom out
Zoom in
Previous page
1/96
Next page
48
3.
Health monitor ICMP host(s)
Disable/DNS/WAN
GW/Custom
Where to Ping for a health check. As there is no
definitive way to determine when the connection
to internet is down for good, you’ll have to define a
host whose availability that of the internet as a
whole.
4.
Health monitor ICMP timeout
1/3/4/5/10 Seconds
How long to wait for an ICMP request to come
back. Set a higher value if your connection has high
latency or high jitter (latency spikes).
5.
Attempts before WAN failover
1/3/5/10/15/20
How many checks should fail for your WAN
connection to be declared DOWN for good.
6.
Attempts before WAN
recovery
1/3/5/10/15/20
How many checks should pass for your WAN
connection to be declared UP.
7.
ICMP host
8.8.4.4
This is where the address of an ICMP host, that will
be used to check the health of your Mobile backup
link, goes. This has to be a Ping-able host.
6.5.1.1 How do I set up a backup link?
First we must pick a main link: Wired or Wi-Fi, and ensure that the link is working. Configure your WAN settings to
use that link and see whether you have internet access. If the main link is working we can continue configuring our
Backup Link.
Now, go to Backup WAN page and configure the settings to your liking. Click Save and wait until the settings are
applied.
Now in the Status -> Network Information -> WAN page there should be a status indication for the backup WAN.
If everything is working correctly you should see this:
The above picture shows the status for Backup WAN configured on a wired main link. You can now simulate a
downed link by simply unplugging your Ethernet WAN cable. When you’ve done so you should see this:
And, if you plug the cable back in you should, again, see this:
If you do not witness the above sequence, your backup link is working!
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teltonika RUT950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teltonika RUT950 in the language / languages: English as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info