681319

Teltonika RUT950 Manual

94
Zoom out
Zoom in
Previous page
1/96
Next page
94
10 Device Recovery
The following section describes available option for recovery of malfunctioning device. Usually device can become
unreachable due to power failure during firmware upgrade or if core files were wrongly modified in the file system.
Teltonika’s router does offer several ways to recover from these situations
10.1 Reset button
Reset button is located on the back panel of the device. Reset button has several functions:
Reboot the device. After the device has started if the reset button is pressed for up to 4 seconds
the device will reboot. Start of the reboot will be indicated by flashing of all 5 signal strength LEDs
together with green connection status LED.
Reset to defaults. After the device has started if the reset button is pressed for at least 5 seconds
the device will reset all user changes to factory defaults and reboot. To help the user to determine how
long should reset button be pressed signal strength LEDs count elapsed time. All 5 lit LEDs mean that 5
seconds have elapsed and reset button can be released. Start of the reset to defaults will be indicated
by flashing of all 5 signal strength LEDs together with red connection status LED.
SIM PIN on the main SIM card (SIM1) is the only parameter that is kept after reset to defaults.
10.2 Safemode
Router contains two firmware images in its internal flash memory. One is master firmware which is the default
firmware on is constantly used by the user. Another is safemode firmware which plays the role of the backup to the
master firmware.
Safemode firmware has most function of master firmware but to reduce its size some function were removed.
Removed functions are:
Wireless Hotspot
VRRPD
SNMP
Web Filter
Safemode firmware can be recognized from different logo and reduced menu in the WebUI. The sole purpose of
safemode firmware is to allow the user to update master firmware so all configuration options are removed. To make
safemode useful it is strongly recommended to back up configuration of master firmware when the user is satisfied with
the setup (described in Safemode section). After configuration backup is created it can be tested by requesting
safemode.
10.3 Bootloader’s WebUI
Bootloader also provides a way to recover the router from damaged firmware. To make it easy for the user
bootloader has its own webserver that can be accessed with any web browser.
Bootloader’s webserver can be started:
Automatically. It happens when bootloader does not detect neither master nor safemode
firmware. Flashing all 4 Ethernet LEDs indicate that bootloader’s webserver has started.
… 94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teltonika RUT950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teltonika RUT950 in the language / languages: English as an attachment in your email.

The manual is 4,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info