7251
11
Zoom out
Zoom in
Previous page
1/41
Next page
Installing the TELES.iTA/2TR Box
Page 6 © 1998 by TELES AG Berlin, Version 1.30/iTA-eu/f/8.02,Issue: June 1998
3.2.2 Assigning Call Numbers to TR Ports
The TR ports are not pre-set to any call numbers. Consequently, your TELES.iTA/2TR Box
will answer all incoming calls at both ports.
If you assign a unique call number to each TR port, the attached device will only answer calls
sent to that number. You will find the call numbers available for your ISDN line in the docu-
ments provided by your ISDN carrier. For point-to-multipoint lines, you may receive three or
more MSNs (depending on country and carrier). These MSNs (= Multiple Subscriber Num-
bers) are your complete call numbers without prefixes).
NOTE: You must enter a call number separately at and for each TR port.
To assign a call number to a TR port, proceed as follows:
1. Attach an analog telephone to the TR port (jack) you would like to configure.
2. Enter the command sequence for the call number without area code.
01PINCall number#
Example: The TR port attached to your telephone is to be assigned the call number: (415)
335561. Do not enter area code. The PIN is 01234. You would enter:
0101234335561#
The number will be active immediately and your telephone will now answer all calls to this
number. When you make calls, this is also the number that will be transmitted to the party
you’re calling.
NOTE: If you do not assign a call number to any telephone, both ports will accept all in-
coming calls. If only one port does not have a call number, it will not ring (even
when the other device on the other port has a number and is called). Only internal
calls to this port are possible in that case. If you do not assign any call numbers
including a number for Personal CallBack, you will not be able to take advantage
of the Personal CallBack feature, nor will you be able to perform remote admini-
stration.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teles iTA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teles iTA in the language / languages: English as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info