638097

Telenet WNDR4300-TN Access Point Manual

39
Zoom out
Zoom in
Previous page
1/48
Next page
Troubleshooting
39
N750 Wireless Dual Band Gigabit Access Point WNDR4300-TN
Troubleshoot with the LEDs
After you turn on power to the access point, the following sequence of events occurs:
1. When power is first applied, verify that the Power LED
lights.
2. After two minutes, verify the following:
• The Power LED lights solid green.
• The LAN port LED lights.
• The 2.4 GHz and 5 GHz LEDs light.
You can use the LEDs on the front panel of the access point for troubleshooting.
Power LED Is Off or Blinking
• Make sure that the power cord is securely connected to your access point and that the
power adapter is securely connected to a functioning power outlet.
• Check that you are using the 12 V
-DC, 2.5A power adapter that NETGEAR supplied for
this product.
• If the Power LED blinks slowly and continuously
, the access point firmware is corrupted. This
can happen if a firmware upgrade is interrupted, or if the access point detects a problem with
the firmware. If the error persists, you have a hardware problem.
LEDs Never Turn Off
When the access point is turned on, the LEDs light for about 10 seconds and then turn off. If
all the LEDs stay on, there is a fault within the access point.
If all LEDs are still lit one minute after power-up, do the following:
• Cycle the power to see if the access point recovers.
• T
o return the access point to its factory settings, press and hold the Restore Factory
Settings button. For more information, see Factory Settings on page 43.
If the error persists, you might have a hardware problem.
2.4 GHz and 5 GHz LEDs Are Off
If these LEDs stay off, check to see if the wireless button on the access point has been
pressed. This button turns the wireless radios in the access point on and off. The 2.4 GHz
and 5 GHz LEDs are lit when the wireless radios are turned on.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telenet WNDR4300-TN Access Point at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telenet WNDR4300-TN Access Point in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telenet WNDR4300-TN Access Point

Telenet WNDR4300-TN Access Point Installation Guide - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info