638097

Telenet WNDR4300-TN Access Point Manual

38
Zoom out
Zoom in
Previous page
1/48
Next page
Troubleshooting
38
N750 Wireless Dual Band Gigabit Access Point WNDR4300-TN
Quick Tips
This section describes tips for troubleshooting some common problems.
Power LED
Check the Power LED to verify correct access point operation.
If the Power LED does not turn solid green within two minutes after you turn the access point
on, reset the access point according to the instructions in Factory Settings on page 43.
Check Ethernet Cable Connections
Make sure that the Ethernet cables are securely plugged in:
• The LAN port LED on the access point is lit if the Ethernet cable connecting the access
point and the gateway router is plugged in securely and the gateway router and access
point are turned on.
• For each powered-on computer connected to the access point by an Ethernet cable, the
corresponding numbered access point LAN port LED is lit.
Wireless Settings
Make sure that the wireless settings in the computer and access point match exactly:
• For a wirelessly connected computer
, the wireless network name (SSID) and wireless
security settings of the access point and wireless computer must match exactly.
• If you set up an access list in the
Advanced Wireless Settings screen, you must add each
wireless computer’s MAC address to the access point’s access list.
Network Settings
Make sure that the network settings of the computer are correct:
• Wired and wirelessly connected computers must have network (IP) addresses on the
same network as the access point.
The simplest way to do this is to configure each
computer to obtain an IP address automatically using DHCP.
• Some cable modem service providers require you to use the MAC address of the
computer initially registered on the account.
You can view the MAC address in the
Attached Devices screen.
… 38 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telenet WNDR4300-TN Access Point at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telenet WNDR4300-TN Access Point in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telenet WNDR4300-TN Access Point

Telenet WNDR4300-TN Access Point Installation Guide - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info