Manual Telekom Speedport OptoLAN Pack (page 23 of 32) (German)

680803

Zoom out

Zoom in

1/32

Getting started 7

Speedport OptoLAN / T-Com_en / A31008-M1062-A151-2-7419 / starting.fm / 12.09.2006

Version 2, 23.05.2005

To do this, press the upper part of the cutter downwards (arrow).

Connecting

1. Place the two Speedport OptoLANs in the required positions.

2. Lay the POF cable.

Please note the following advice before installing the POF cable in your

home.

The transparent fiber core transmitting the data in your POF cable is

protected from external damages by a plastic coating. To ensure a

smooth operation of your devices when using the POF cable, you

should protect the cable from mechanical or chemical stresses which

could damage or destroy its plastic coating.

You can easily lay the POF cable at home under carpets, behind

shelves, or in the edge between walls and the floor. Doing so, please

ensure that you do not place any heavy items on the POF cable and

that you do not bend it down to less than 25 mm.

For the installation of the POF cable on plain surfaces, all mechanical

methods are suitable which do not cave or crimp the cable and ensure

an adherence to the given bending radius. Avoid the attachment with

staples, nails, or similar metallic items that expose the POF cable to

high pressure during and after the installation process.

Note Route the two wires through two adjacent holes on the

cable cutter. As you do so, make sure that the two wires

are the same length.

Note Ensure that the clips on the Speedport OptoLAN are open,

i.e. that they are in the lower position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telekom Speedport OptoLAN Pack in the language / languages: German as an attachment in your email.

The manual is 0,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telekom Speedport OptoLAN Pack Manual

Product: