680803
22
Zoom out
Zoom in
Previous page
1/32
Next page
6 Getting started
Speedport OptoLAN / T-Com_en / A31008-M1062-A151-2-7419 / starting.fm / 12.09.2006
Version 2, 23.05.2005
Installation site
The installation site for the two Speedport OptoLANs must be in the
vicinity of an electrical power socket.
Wall installation
You can also mount your Speedport OptoLAN on the wall. To do this,
use the holes on the base. During the mounting process, make sure
that you do not bend the cables. Screws and plugs are not included in
the delivery package. Use a standard plastic plug and the appropriate
screw to mount the device on the wall.
Cutting to size
1. Cut the POF cable supplied with the device to the approximate
length you require with a pair of scissors, adding a few centimetres.
2. Separate the two wires at the end of the cable.
3. For an exact cut, use the cable cutter to cut the POF cable to the re-
quired length.
Modern furniture has a vast range of paint and plastic fin-
ishes and the different types are treated with various clean-
ing agents. Some of these agents may contain compo-
nents that could damage or soften the Speedport Opto-
LAN casing. Any casing whose surface has been modified
by this type of unsuitable treatment may leave undesirable
marks on the surface of the furniture. Temperature-sensi-
tive surfaces could also be damaged by the heat dissi-
pated by the device.
Take all the necessary precautions when mounting the
screws, e.g. when drilling and plugging. Understandably,
T-Com cannot be held liable for any damage that is
incurred during these activities.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telekom Speedport OptoLAN Pack at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telekom Speedport OptoLAN Pack in the language / languages: German as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info