519065
14
Zoom out
Zoom in
Previous page
1/44
Next page
Safety Instructions
Before using the remote control, please read these operating instructions carefully. Please keep
the instruction manual for consultation purposes or for possibly handing it over to third parties.
General information
Do not try to repair the remote control yourself.
The universal remote control is equipped with a class 1 infrared diode.
The device is equipped with a safety system that prevents the leakage of hazardous laser beams
during normal use.
To avoid eye injury never manipulate or damage the safety system of the device.
Do not expose your remote control to dust, intense sunlight, humidity, high temperatures or
mechanical shocks.
Old and new batteries must never be combined.
Battery information
Keep batteries away from children. Consult a doctor immediately if a battery is swallowed.
Before inserting the batteries, check that the contacts in the unit are clean, and clean them if
necessary.
Only insert new batteries. Never mix old and new batteries.
Never mix battery types.
When inserting the batteries, take care that the polarity (+/–) is correct.
CAUTION!
Danger of explosion if the batteries are replaced incorrectly. Only replace the
batteries with ones of the same or equivalent type.
Never attempt to recharge the batteries. Explosion hazard!
Store batteries in a cool dry place. Excessive direct heat may damage the batteries. Therefore,
never expose the unit to strong sources of heat.
Never short circuit the batteries.
Never throw batteries into a fire.
Remove the batteries if the unit is not to be used for long periods.
Remove leaking batteries from the unit immediately. Clean the contacts before inserting new
batteries. Battery acid may cause burns!
Remove empty batteries from the unit
Cleaning
Clean your remote control with a dry cloth only, do not use any corrosive or aggressive cleaning
agents.
Inserting the batteries
Insert 2 LR03/AAA alkaline batteries
1. Open the cover on the back of the remote control.
2. Check the +/– polarity on the batteries and inside the compartment.
3. Insert the batteries.
4. Close the cover.
Adjustments after battery replacement
If the batteries are correctly inserted, the LCD screen should display the active mode (e.g. TV),
the week day and the time. For adjusting Time and Date, please read further in this manual.
After battery replacement, the time, the date and LCD backlight are reset to factory defaults, all
other User programmed parameters including programmed codes and learning functions are
retained indefinetly.
This universal remote control can control up to 8 different Audio/Video devices and is compatible
with the majority of television sets, DVD players and video recorders, as well as digital boxes
such as satellite or cable receivers, DVBT receivers (Digital Video Broadcast Terrestrial), ADSL
decoders, and so on.
Except for the TV mode key, the DVD, VCR, SAT, CBL, AMP, AUX1 and AUX2 mode keys can be
programmed to control a device other than that indicated on the key. It is therefore possible, for
example, to allocate SAT mode to the DVD key. You must enter the code corresponding to the
manufacturer and the device by using one of the methods indicated in this manual.
14
55415 BedienAnltg TeFu_Zweite Version 08.12.09 16:32 Seite 14
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TRC 850 - 8in1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TRC 850 - 8in1 in the language / languages: German as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telefunken TRC 850 - 8in1

Telefunken TRC 850 - 8in1 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info