486504
45
Zoom out
Zoom in
Previous page
1/78
Next page
44
Connections and Assemblig
Connecting TV via aerial cable (if you are not using a RCA cable)
If you are using a RCA cable, select the RCA (AV) input on the TV to see the picture from the player.
If you are not using a RCA cable, select the button number on the TV reserved for the VCR-DVD player.
If you are not using a RCA cable, your player can transmit pictures and sound to the TV via the coax aerial cable. Just
tune the TV to the player's transmitting channel (factory set to UHF channel 36). Tune the TV carefully to ensure the
best pictures and sound.
Once you have carried out the steps in "Connecting
up the player" , switch on your TV.
Press the [OK] button of the players remote control
longer than 5 seconds to call the player´s test
picture.
Tune the TV to the test picture using the channel pre-
set functions of your TV as described in its manual.
When you have found the test picture, store it under
the button number on your TV for player input.
Press the [OK] button of the players remote control
again longer than 5 seconds to release the test
picture.
1
If the quality of the test picture transmitted to the TV is
poor due to interference caused by a station
transmitting on channel 36, you can change the
player RF output to a different transmitting channel.
While the 'RF 36' (or whatever) is showing on the
front display, type in a free transmission channel
number between 27 and 69, then re-tune your
television to it so you see the test picture again.
Press the OK button until the 'RF' number and the test
picture go off.
You can also change the RF output channel through
the set-up menu, providing you can see it clearly ! To
do this, press [SETUP], select "VCR SETUP" and press
[OK]. Then select "RF OUTPUT SET" and press [OK].
Type in a free channel and re-tune the TV so you see
the RF OUTPUT menu again.
Of course, you might not know a free channel, but
you can experiment. You can also do this the other
way round if your TV lets you type a transmission
channel number into its tuning set-up menu.
2
If the quality of the test picture transmitted to the TV is poor, fine-tuning on the TV may help
(refer to the TV manual).
Without a RCA cable, you will not get stereo sound from a TV capable of stereo sound.
RF OUTPUT SET
0-9:SELECT (27-69)
OK:CONFIRM SETUP:END
CH 36
CHECK IT!
DV6T714D-RG1H(TDV6000)2 02.8.12 10:38 AM ˘ ` 44 mac001 300DPI 120LPI
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telefunken TDV-6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telefunken TDV-6000 in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info