Manual Telair TIG3000D Inverter generator (page 13 of 48) (English)

688827

Zoom out

Zoom in

1/48

Vers. 002

TIG 3000 D

5.2 Safety Switch

Before starting any maintenance operations or

carrying out electrical connections inside the

generator, the safety switch must be turned to its

O (Off) position (fig.16 ref. 1). The switch must

then be turned back to its I (On) position once the

electrical connections or maintenance operations

have been completed.

On the right side of the generating set is the

cable guide (fig.16 ref. 2) through which the

electrical cables must be led for generator

connection purposes. The cables coming from

the battery must be secured to the special studs

(fig.16 ref. 3). The 230 Volt utility wires and

ancillary services must be connected to the

terminal strip that is located below the protection

(fig.16 ref. 4).

5.3 Battery connection

On the positive power supply line con-

nected to the generator, next to the battery,

provide a 100 A rating fuse.

The connection to a battery with volt-

age different from 12 volts or the reversal of

polarity will cause irreversible damage to the

generator.

The generator must be connected to a 12 Volt

battery (for the required specifications see the

table with generator data). Depending on the re-

quirements it can be connected either to the ve-

hicle battery or to the service battery.

The connected battery is charged by the genera-

tor itself with a maximum current of about 10 A.

For connection purposes, insulated cables of dif-

ferent colours should be used (usually red and

black, connected to the positive pole and nega-

tive pole - respectively) with sections:

16 mm² for lengths up to 6 metres

25 mm² for longer lengths.

On the generator side, each wire should be fixed

to an eyelet terminal with a Ø 8 mm hole. By ob-

serving polarity indications, fix the eyelets to the

studs + and - on the generator (fig.17 ref. 1,

fig.17 ref. 2) taking care to use two wrenches as

shown in fig.17, to stop the studs from turning.

5.4 Connection to a 230 V~ utility

Incorrect connections or connections

performed with wires not up to 230 V~ voltage

requirements can damage the generator and

its connected utilities as well as endanger

users.

Remove the two screws that fix the protective

cover of the terminal strip (fig.17 ref. 3) and re-

move it.

From here access will be obtained to the terminal

strip for connection to 230 V

utilities (fig.18 ref.

1) and for optional service connections (fig.18 ref.

2).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair TIG3000D Inverter generator in the language / languages: English as an attachment in your email.

The manual is 16,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telair TIG3000D Inverter generator

Telair TIG3000D Inverter generator User Manual - Dutch - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair TIG3000D Inverter generator Manual

Product: