688826

Telair TIG3000B Inverter generator Manual

22
Zoom out
Zoom in
Previous page
1/44
Next page
TIG 3000 B
Vers. 001
22
GB
generator immediately stops and the red alarm
LED lights up.
8.9.6 Data communications error
this message indicates that
there has been an error in communication be-
tween the control panel and the control board on
the generator. Check the connection. Obviously
this alarm cannot be cancelled merely by press-
ing the START/STOP button.
8.9.7 Error codes
Open the menu (as indicated in another part of
the manual) until the following text appears
By pressing BOOST and then START/STOP or
AUTO, the error codes of the last 10 recorded
alarm events can be viewed. This is the list of the
main alarm codes:
1 Start-up failed
2 Battery voltage too low
3 Motor over-revving
4 Oil level or pressure
5 Motor over-heating
9 Data connection to inverter lost
50 Short circuit on inverter output
51 Overload on inverter output
52 Inverter voltage too low
53 Inverter over-heating
57 An inverter input phase is missing
59 Inverter continuous voltage too high
8.10 Warning messages and causes
8.10.1 Check engine oil level
this message appears alter-
nately with the normal messages on the display
and is highlighted by the illumination of the red
LED (Fig. 30 ref. 7); it calls for the oil level to be
checked (and topped up if necessary).
Once the check has been completed, reset the
corresponding hour counter:
press the MENU button and the following mes-
sage will appear
Press the MENU button again to confirm reset-
ting of the hour counter. The following message
will appear
the red LED switches off (Fig. 30 ref. 7) and the
related message disappears from the display.
8.10.2 Engine oil replacement
this message appears alter-
nately with the normal messages on the display
and is highlighted by the illumination of the red
LED (Fig.30 ref.7); it calls for the engine oil to be
changed.
After completing the operation reset the corre-
sponding hour counter:
press the MENU button and the following mes-
sage will appear
Press the MENU button again to confirm zeroing
of the hour counter. The following message will
appear
the red LED switches off (Fig. 30 ref. 7) and the
related message disappears from the display.
8.10.3 Low fuel level
if the connection described in
another part of the manual has been performed,
this message indicates that the fuel has reached
the minimum reserve level, and the maintenance
LED lights up (Fig. 30 ref. 7). The generator will
continue to operate until the fuel runs out.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Telair TIG3000B Inverter generator at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Telair TIG3000B Inverter generator in the language / languages: English as an attachment in your email.

The manual is 12,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Telair TIG3000B Inverter generator

Telair TIG3000B Inverter generator User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info