Manual Telair Energy 4010g (page 11 of 40) (English)

688852

Zoom out

Zoom in

1/40

Vers. 001 Energy 4010 G

Always fit a 100 A fuse

onto the positive cable connecting the

generating set to the positive pole of the

battery.

4.5 Electric Load connection

To connect loads to the power generating set,

use a three-pole cable up to the applicable

standards in force. The correct cross section is

shown in Table 1.

Table 1

Model

Sect. mm

line 230 V

Cable leng.

Lgth < 6 m

Cable leng

Lgth. > 6 m

4010G

4 10 16

LINE

CONNECTION 230 V

BATTERY

CONNECTION

For connection to the 230V input line, the

generating set is equipped with a special terminal

strip (Fig.13 Ref.1) to which the cables must be

connected.

Use the special cable outlet (Fig.11 Ref.1) to

prevent water seeping into the generating set.

Although the generating set is equipped with a

special internal thermal cut-out to cut power

delivery in the event of overload or short circuits

(Fig.13 Ref.5), it is advisable to install (in the

vehicle control panel) a thermomagnetic cut-out

switch, suitably set to stop power delivery to the

various users when current absorption exceeds

16.5 Amp for ENERGY 4010 G

If the generating set thermal cut-out switch has

been operated, press the button (Fig. 7 Ref. 5) to

restore closed circuit and power delivery

conditions.

Carefully check the

position of the line connection for picking up

230 Volt current. Wrong connection could

damage the generating set irreparably or

create dangerous short circuits.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair Energy 4010g in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair Energy 4010g Manual

Product: