Manual Telair Energy 4010g (page 9 of 40) (English)

688852

Zoom out

Zoom in

1/40

Vers. 001 Energy 4010 G

4.2.2 Floor fastening

The package contains a drilling jig, which allows

the generator bearing surface to be prepared

quickly, fig. 7.

Place a spongy, heat-

resistant gasket around the outlet opening of

the exhaust pipe. The gasket height must

reach the bottom of the generator and has the

purpose of preventing hot air from spreading

inside the generator compartment.

The brackets of the generator must be moved in

order to fasten the Energy 4010 G on the

bearing surface.

On both sides, remove the hole plugs (fig. 8 ref.

1) and screw out the screws (fig. 8 ref. 2) in order

to remove the bracket (fig. 8 ref. 3).

Place the bracket (fig. 9 ref. 3) on the 4 holes

which were previously covered by the plugs

using the same screws (fig. 9 ref. 2) and apply

the hole plugs (fig. 9 ref. 1) in the seats which

previously housed the screws.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair Energy 4010g in the language / languages: English as an attachment in your email.

The manual is 2,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair Energy 4010g Manual

Product: