Manual Telair Energy 2510D (page 9 of 44) (English)

688848

Zoom out

Zoom in

1/44

Vers. 002

Energy 2510 D

Place the bracket (fig. 10 ref. 3) on the 4 holes

which were previously covered by the plugs

using the same screws (fig. 10 ref. 2) and apply

the hole plugs (fig. 10 ref. 1) in the seats which

previously housed the screws.

The generator can now be located on the

previously drilled surface (fig. 8) using the

suitable vibration-damping cylinders (fig. 11 ref.

4.3 Connecting the mufflers

The Energy 2510 D generating set comes with a

suitable exhaust pipe kit which consists of 2

mufflers, 2 exhaust pipes and their connections

Insert first the U-shaped fastening clamp code

00828 on a terminal of the 2m pipe code 00705,

let the pipe terminal through the suitable slot by a

section of at least 3 cm (fig. 12 ref. 3) into the

exhaust manifold of the generator (fig. 12 ref. 1),

then tighten the U-shaped clamp (fig. 12 ref. 2)

on the pipe-manifold connection.

Connect the 2-terminal muffler code 01760 (fig.

13 ref. 3) on the other end of the 2m pipe (fig. 13

ref. 1) observing the arrow showing the gas flow.

Tighten with a clamp D.32-35 code 01655 (fig. 13

ref. 2). Place the muffler (fig. 13 ref. 3) under the

floor of the vehicle via a suspending rubber

stopper code 02440 (fig. 13 ref. 4) and fasten the

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair Energy 2510D in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair Energy 2510D Manual

Product: