Manual Telair Energy 2510b (page 23 of 40) (English)

688849

Zoom out

Zoom in

1/40

Vers. 002

Energy 2510 B

7.4.2 Air filter maintenance

A clogged air filter will re-

duce air flow to the carburettor. To prevent

carburettor malfunction, check the air filter

regularly. If the engine is used in a heavily

dusty environment, we suggest checking the

air filter every time before starting up the en-

gine.

Never use Diesel oil or

solvents with a low evaporation point for

cleaning the air filter cartridge, as this could

cause fires or explosions.

Never operate the engine without an air filter; the

engine would wear down quickly due to air-borne

dust.

To access the filter cartridge, remove the air filter

closing lid (Fig.36 Ref.3) after having unscrewed

both screws that fix it to the air filter box.

Take out the cartridge (Fig.36 Ref.1) and wash it

in mild detergent and water then rinse thor-

oughly. Let the filter cartridge dry out completely,

then dip it in clean engine oil. Squeeze out care-

fully any excess oil.

Replace the cartridge only if visibly worn out.

7.4.3 Spark plug maintenance

Use spark plug models BP4ES, BPR4ES (NGK),

W20EP-U, W20EPR-U (ND) or else spark plugs

made by other manufacturers but compatible with

the above.

Never use spark plugs with a different tempera-

ture degree from those listed above.

•

Take the cap off the spark plug

(Fig.36 Ref.2)

and using the special wrench take out the

plug.

•

Perform a visual inspection. Replace in case

of obvious wear or if the insulator is broken or

cracked.

•

Use a steel brush to clean the spark plug, if it

can be used again.

•

Use a thickness gauge to measure the dis-

tance between the electrodes. The right dis-

tance should be between 0.7 and 0.8 mm

(Fig. 37).

• Correct the distance if necessary, bending the

side electrode.

•

Make sure that the spark plug washer is in

good condition and then screw back on by

hand to make sure that it is correctly put back

in place. Finally, tighten to the right torque us-

ing the special wrench (see instructions in the

engine user and maintenance manual).

When assembling a new

spark plug, tighten by 1/2 turn after the spark

plug has compressed the sealing washer.

If you put back the old plug after having re-

moved it, tighten it by 1/4 turn after it has

compressed the sealing washer.

The spark plug must be

tightened firmly. A badly positioned spark

plug may become very hot and damage the

engine.

Hello,
I can not get start on my Telair Energy 2510b. It seems to me that the fuel do not reach the "engine".
Fuel pump?

Det ser ikke ut som bensinen suges fra bensintanken. Kan dette være årsaken og evnt.hva må gjøres?
Jeg tatt service, skiftet olje, skiftet tennplugg og rengjort luftfilter.

mvh
Thor, +4795972210
thor@jemtland.no

Submitted on 8-7-2022 at 08:48
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Telair Energy 2510b in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Telair Energy 2510b Manual

Product: