783935
11
Zoom out
Zoom in
Previous page
1/64
Next page
20. Consult your doctor before use, especially if you suffer from a disease like diabetes.
21. Before starting the training, we recommend placing a training mat or similar under the
product to increase stability and avoid damage to the floor.
22. The elliptical trainer does not have an override. Therefore, the moving parts cannot be
stopped immediately.
23. WARNING — This training device is not suitable for purposes requiring high accuracy.
24. This device complies with EN ISO 20957-1:2013, user class HC (H = home use, C = low
accuracy).Stationary training device. Not suitable for therapeutic purposes.
WARNING: Only use this product while seated. Do not stand on the
product. The product moves by itself, you do not need to propel it!
BUTTON FUNCTIONS
On the control panel (#3) and remote control (#4):
Remote control tip (#4): The remote control requires two 1.5V AAA batteries (not included in delivery
contents).
Power button / start/stop button (on remote control): Starts and stops the device. Press the power button on
the control panel twice to start the device using the control panel. To start the device using the remote control,
first press the red power button and then the Start/Stop button on the remote control.
Tip: The device takes three minutes to start once the power / start/stop button has been pressed. This is
normal and is not a defect.
Direction button: Press the button to change the working direction of the pedal. Only available in manual HR
mode, the speed button: Press this button to increase or decrease the speed, for example, 01,02,03,04,05. Only
possible in manual HR mode.
Mode button: Press this button to switch the display between scan, time, distance, speed, counter, or calories.
Function button: Press this button to switch between the preset programs and manual mode.
Getting started
1. Connect the power cord to the front side and then to the socket.
2. Press the power button until the device switches off. The screen displays „HR“ for manual mode.
3. Press the Function button to switch to the automatic programmes P1, P2, P3 or return to manual mode (HR).
Manual mode (HR:
The product starts up in manual mode (HR) by default.
To activate manual mode, press the function button after P3 a second time. HR displays on the screen.
Five speeds are available in manual mode:
speed 1= 1.5km/h, speed 2= 2.5km/h, speed 3= 3.5km/h, speed 4= 4.5km/h, speed 5= 5.7km/h.
Direction button: Press the button to change the working direction of the pedal. Only available in manual mode
(HR).
Speed button: Press this button to increase or decrease the speed, for example, 01,02,03,04,05. Only possible
in manual HR mode.
Mode button: Press this button to switch the display between scan, time, distance, speed, counter, or calories.
Forward or reverse motion is possible in manual mode (HR).
Automatic mode/preset programmes:
Press the Function button once for P1, twice for P2, and three times for P3.
The pedals rotate at different speeds and directions for different programmes.
Speed and direction cannot be set in automatic mode.
11
M30584/M30868_VibroLegsElliptical_Manual_20210923_DR.indd 11M30584/M30868_VibroLegsElliptical_Manual_20210923_DR.indd 11 23.09.21 11:4923.09.21 11:49
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tel Sell VibroLegs Elliptical at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tel Sell VibroLegs Elliptical in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 1.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info