783939
12
Zoom out
Zoom in
Previous page
1/48
Next page
SUGGESTIONS
Always wear clean sports shoes to prevent contamination of the belt.
Use a damp cloth to clean the outside of the belt.
Fold the treadmill together and wipe or vacuum the surfaces. This will prevent dust from entering the unit and causing it
to malfunction.
Before cleaning / servicing the unit, make sure it is switched off and disconnected from the power supply.
Do not use solvents to clean the device.
Remove stubborn, oily, greasy stains or other dirt from your treadmill with a mild detergent and cotton cloth. Finally,
remove excess detergent with a dry cloth.
Do not use any liquids or cleaning agents on the control panel, only a dry cloth.
Do not immerse any of the parts of the device in liquid detergents.
OPERATING THE COMPUTER FIG. 4:
The display offers you a selection of functions that allow optimal use of the device and the programs.
On / Off: Turning the device on and off.
Mode: Program Selection, Timing Data display on screen while you‘re training: speed, time, distance, and
calories burned
Speed +/ -: Allows you to set the treadmill speed. The speed range is between 1.0 and 10 km/h.
Explorer: is used to determine the amount of time already traveled, distance, and calories burned.
LED Speed Indicator: Indicates the speed of your workout.
LED Time Display: Indicates the elapsed training time.
LED Distance Display: Displays the distance covered.
LED Calorie Indicator: Shows calories burned.
Music feature: 3.5mm audio cable - audio input.
IMPORTANT: For safe handling, use a grounded circuit. Grounding reduces the risk of electric shock. The
equipment must be connected to a grounded electrical outlet that complies with local safety guidelines and
standards. As soon as you connect the device to the power, the LEDs light up and you hear 5 beeps. This
indicates that the device is in standby mode. The display shows: „= = =“.
TROUBLE SHOOTING:
Problem Possible reason Solution
The device does not turn on / does
not work.
The device is not connected to the
power.
Connect the device to the power
supply.
The device does not turn on / does
not work.
The device is switched off Press the ON / OFF button.
The device does not turn on / does
not work.
The voltage is too low. Wait for the power to work
properly again.
The device does not turn on /
does not work. The emergency button is not
attached. Attach the emergency button
to the magnetic part of the
computer.
HOW TO FOLD THE TREADMILL: FIG.57
1. Turn the locking bolt counter clockwise.
2. Lift the lower part of the device.
3. Pull out the fixing knob and place it in the hole of the main supports.
4. Now you can slide your treadmill by holding the handles with both hands and lowering so that the wheels
touch the ground.
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tel Sell iWalk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tel Sell iWalk in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 4.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info