783939
11
Zoom out
Zoom in
Previous page
1/48
Next page
in the unit and cause an accident. Wear sportswear.
NEVER climb onto the treadmill when you put it into operation. To mount, put
your feet temporarily on the treadmill covers to each side, and start exercising
only when the treadmill is already moving.
NEVER start your training at high speed.
Persons with physical disabilities or elderly persons MUST consult a doctor
before use.
DO NOT use the device if you have a pacemaker or other cardiac device.
Pregnant women should consult their doctor before use.
Immediately replace damaged parts and do not use the device until it is
completely repaired.
DO NOT use the treadmill if the power cord is damaged.
Disconnect the treadmill from the mains when not in use.
Store the treadmill in a clean and dry place.
It is essential to attach the emergency button to the magnetic part of the
computer, otherwise the unit will not start. ALWAYS attach the clamp of
the emergency button cord to your clothing during training. This serves
to bring the treadmill to a standstill in an emergency.
The tread of the belt is 120x40 cm.
The noise emission under load is higher than without load.
ASSEMBLY (Fig. 3)
Your treadmill is already preassembled, now follow the steps in order to begin exercising:
1. Place the treadmill on a flat, level surface and remove all packaging.
2. Bring the main handle posts into an upright position and secure them with the locking bolts (A) (turn the
knob clockwise).
3. Place the fixing knob (B). This holds the main bar in position.
4. Use the Allen key (H) and screws (C) to secure the handles to the main posts. Connect the cable of the
computer and cover the screws with the plastic covers (D).
5. Secure the computer in the center with the computer fixing (E).
6. Place the emergency button (F) on the magnetic part of the computer.
CLEANING AND LUBRICATION OF THE TREADMILL
To clean or lubricate the inside of the belt, you must loosen the belt. Then slide your hand and a cloth under
the belt to remove any accumulated dirt and add a drop of lubricating oil to each side (top, bottom and center).
Once you are done with the cleaning / lubrication, reassemble the belt. Your device is equipped with a factory
setting, it may require an individual adjustment, especially in the first few weeks. The changes in tension are a
normal occurence.
Turn the tension screws to the left on both
sides to loosen the band.
Turn the tension screws to the right on both
sides to tighten the band.
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tel Sell iWalk at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tel Sell iWalk in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 4.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info