Manual Teka TBC 32000 XFL (page 40 of 96) (English, German, French, Polish, Portuguese, Turkish, Spanish)

781116

Zoom out

Zoom in

1/96

The clips and the sealing joint are provi-

ded, and can be found in the packaging.

Connecting the electricity

Before connecting the hob to the electric

mains, check that the voltage and fre-

quency of the mains matches what is

shown on the hob’s rating plate, which is

located lower down, and on the guarantee

certificate or, where appropriate, the tech-

nical datasheet supplied, which should be

kept together with this manual.

The electric connection is made via an om-

nipolar switch or plug where accessible,

which is suitable for the intensity to be to-

lerated and which has a minimum gap of 3

mm between its contacts, which will ensu-

re disconnection in case of emergency or

when cleaning the hob.

The connection should include correct ear-

thing, in compliance with current norms.

If the flexible supply cable fitted to the VT CM

hob model ever needs to be changed, it

should be replaced by TEKA’s official service.

The input cable should not be in contact ei-

ther with the body of the hob or with the

body of the oven, if the oven is installed in

the same unit.

Positioning the oven

See the corresponding manual.

The oven’s placement should be as shown

in your instruction manual, and the manual

should also be referred to when connec-

ting the electricity. Before accessing the in-

side of the appliance, the appliance should

be disconnected from the power.

Joining the hob to the oven

or the control panel

For this purpose, four cardan telescopic

shafts are included with the hob. (See fig.

5). The way to join them is as follows:

1Turn off the electricity.

2Detach the cardan telescopic shafts by

pressing on the retention clip (A), where

it says PUSH, with a slim screwdriver,

and pull the extension out a few centi-

metres.

3Remove the four pins from the ends (B).

4Put the oven part-way into its space, ta-

king care not to drag the cardan teles-

copic shafts coming from the hob, and

leaving enough space to put in the other

ends of the telescopic shafts into the

shafts in the rear part of the control

panel, and then replace the pins. (See

fig. 5)

40 mm

20/30 mm

Self-tapping screw for 20

and 30 mm thick worktops

40 mm

20/30 mm

Self-tapping screw for 20

and 30 mm thick worktops

Sealing joint

fig. 3

fig. 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teka TBC 32000 XFL in the language / languages: English, German, French, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 10.35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teka TBC 32000 XFL Manual

Product: