Manual Teka TBC 32000 XFL (page 39 of 96) (English, German, French, Polish, Portuguese, Turkish, Spanish)

781116

Zoom out

Zoom in

1/96

space of at least 20 mm should be left at

the back of the cupboard. As an alternati-

ve to this type of panel, you can install a

detachable protective cover to the bottom

of the hob, which can be obtained from our

Technical Services using the reference in-

dicated.

When hobs are handled before

being installed, care should be taken in

case there is any protruding part or

sharp edge which could cause injury.

When installing units or applian-

ces above the hob, the hob should be

protected by a board so that the glass

cannot be damaged by accidental

blows or heavy weights.

The glues used in manufacturing

the kitchen unit and in the adhesive on

the decorative laminate of the worktop

surface should be made to tolerate tem-

peratures of up to 100ºC.

TEKA assumes no responsibility

for any malfunction or damage caused

by faulty installation.

PLEASE REMEMBER THAT THE GUA-

RANTEE DOES NOT COVER THE

GLASS IF IT SUFFERS A VIOLENT

BLOW OR IF IT IS USED IMPROPERLY.

Fixing the hob

(see figs. 3 and 4)

When the gap has been properly sized,

the sealing washer should be put on the

lower part of the hob. With models VR 622,

TR 620, TR 640, TT 640, TT 600, TB 600,

TR 600, TT 630, TR 735 AB, TM 620, TR

641, TM 601 and TB 641 the washer will

be stuck to the lower face of the glass.

Silicone should not be applied between

the glass and the unit worktop because

if it becomes necessary to remove the

hob from its position, the glass could

break when trying to detach it.

Position the clips as shown in the diagram,

fastening them to the openings in the lower

part of the body using the screws provided.

For worktop thicknesses of 30 mm. or less,

use the self-tapping screws that are provi-

ded as a fastening accessory - put them

into the clip’s round hole. This hole will be

threaded as the screw is inserted into it,

and this should be done before fixing the

clip to the worktop.

VTN DC and TC 620

Rest of the models The dimensions L and W are

shown in the table "Dimensions and characteris-

tics" of the Technical Information section.

fig. 2

Fitting holes

maximun 575

Ref. Models

81253177 TT 600, TB 600, TR 640, TT

640, TR 620, TT 630, TR 600,

TR 735 AB, TM 620, TR 641,

TM 601 and TB 641

81253176 TT 620 and TC 620

Protective cover

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teka TBC 32000 XFL in the language / languages: English, German, French, Polish, Portuguese, Turkish, Spanish as an attachment in your email.

The manual is 10.35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teka TBC 32000 XFL Manual

Product: