18328

Teka CI345.1 Manual

9
Zoom out
Zoom in
Previous page
1/20
Next page
FULLY BUILT IN REFRIGERATION
FITTING INSTRUCTIONS
MODELS FOR UNDER-COUNTER FITTING
REVERSING THE OPENING OF THE DOORS
This appliance is designed so that the opening of the doors can be reversed. To achieve
this proceed as follows:
SINGLE DOOR
REVERSING THE DOOR
(fig. 1)
- Remove hinge pin 1 and hinge bush from top rail.
- Remove the door.
- Remove journal 3 (and the relative washers) from the lower right-hand hinge and refit it
to the lower left-hand hinge.
REVERSING THE LOW TEMPERATURE COMPARTMENT DOOR (fig. 4)
In models with freezer compartments, in order to reverse the door, proceed as follows:
(fig.4a):
- Open door 1 to about 90°.
- Remove coupling 2.
- Remove hinge 3 together with door 1.
- Turn the three items 180° and refit everything by reversing the procedure.
(fig.4b):
- Open the door to 90 degrees.
- Remove the bracket 2.
- Remove the lower hinge 3.
-
Turn the door (1) round by 180 degrees and fix the bracket (2) on to the opposite
side.
Two door refrigerator (fig. 2):
- Remove upper hinge 1 and journal 2 (and the relative washers).
- Remove the upper door.
- Remove central hinge 3 (and the relative washers).
- Remove the lower door.
- Remove journal 4 (and the relative washers) from the lower right-hinge and refit to the
lower left-hand hinge.
- Reverse screws 7, screw cover plugs 6 and hole cover plugs 5 on the unit.
- Furthermore, with models fitted with side fixing clamps, instead of the hole cover plugs
5, reverse the clamp covers (fig. 3) which are fly-fitted on the clamp.
Combi (fig. 3):
- Remove hinge pin 1 and hinge bush from top rail.
- Remove the upper door.
- Remove the centre hinge 2 (and the relative washers).
- Remove the lower door.
- Remove journal 3 (and the relative washers) form the lower right-hand hinge and refit it
to the lower left-hand hinge.
- Reverse the fly-fitted clamp cover 4, mounted on the clamp.
9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teka CI345.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teka CI345.1 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info