480105

Tefal FV9910 Freemove Manual

10
Zoom out
Zoom in
Previous page
1/122
Next page
EN
DE
FR
NL
ES
PT
IT
DA
SV
NO
FI
EL
HU
CS
SK
SL
SR
HR
RO
BG
TR
UK
RU
PL
ET
LV
LT
7
Storing your iron
• Set the thermostat control to “MIN”. Disconnect the base and empty the tank – fig.23.
• Wait for the soleplate to cool – fig.24. Wind the cord around the iron and its base – fig.25.
• Carry the iron and the base with two hands – fig.26 and 27.
PROBLEM CAUSES POSSIBLES SOLUTIONS
Brown streaks come
through the holes in
the soleplate and
stain the linen.
You are using chemical descaling
agents.
Do not add any descaling agents to the water in the
water tank.
You are not using the right type of
water.
Perform a self-cleaning operation and consult the
section “What water to use?”
Fabric fibres have accumulated in the
holes of the soleplate and are burning.
Perform the self-cleaning operation and clean the
soleplate with a damp sponge. Vacuum the holes of
the soleplate from time to time.
The soleplate is dirty
or brown and can
stain the linen.
You are ironing with an inappropriate setting
(temperature too high).
Clean the soleplate as indicated above.
Select the appropriate setting.
Your linen has not been rinsed sufficiently
or you are using starch.
Clean the soleplate as indicated above. Always spray
starch onto the reverse side of the fabric to be ironed.
Your iron is releasing little
or no variable/TURBO
steam.
The water tank is empty. Fill the water tank.
The anti-scale valve is dirty. Clean the anti-scale valve.
Your iron has a build-up of scale. Clean the anti-scale valve and carry out a selfclean.
Your iron has been used dry for too long. Carry out a self-clean.
Your iron needs recharging. For optimum efficiency, place the iron on its base to
be recharged at each resting period.
You are not using the the variable steam
trigger.
Hold the variable steam trigger down while you iron
to obtain a constant flow of steam.
The variable steam has not been
activated.
Gently shake the iron in a horizontal position, while
holding down the steam trigger until the steam
output begins.
The soleplate is
scratched or damaged.
You have placed your iron flat on a
metallic rest-plate or ironed over a zip.
You have cleaned your soleplate with an
abrasive or metal pad.
Always set your iron on its base. Try to avoid ironing
over zips. Refer to the chapter “Clean the soleplate”.
Your soleplate is
releasing particles.
Scale is building up on the soleplate. Carry out a self-clean operation.
Water is running out of
the water tank flap.
You have not closed the water tank flap
properly.
Check that the water tank flap is locked properly.
Water drips from the
holes in the soleplate.
You have stored the iron horizontally,
without emptying it and without setting
it to MIN.
See the section “Storing your iron”.
The red light on the
display panel flashes
when the iron is on the
base.
Connection problem between the iron
and the base.
Check that the iron is pushed back completely and
connected to the base.
The spray does not spray. There is not enough water in the water
tank.
Fill up the water tank.
The base moves on the
ironing board.
The base has not been properly
connected to the EasyFix system or the
EasyFix system is not properly fixed to
the ironing board.
Check that the base is properly connected to the
EasyFix system and that the EasyFix system is
securely screwed onto the board.
Your iron is cooling down. You are not placing it on its base
regularly.
Place the iron on the base during each resting period
while you change your item of clothing.
If there is a problem
If you have any problem or queries, please contact our Helpline:
0845 602 1454 – UK / (01) 677 4003 – ROI or consult our website – www.tefal.co.uk
TEFAL621-Freemove_1800122940_Mise en page 1 09/02/12 14:04 Page7
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tefal FV9910 Freemove at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tefal FV9910 Freemove in the language / languages: All languages as an attachment in your email.

The manual is 14,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tefal FV9910 Freemove

Tefal FV9910 Freemove User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info