Manual Tefal FV9910 Freemove (page 8 of 122) (All languages)

480105

Zoom out

Zoom in

1/122

Preparation

Setting up

• Attach the EasyFix system onto the ironing board by turning the screw. It is normal that the small piece

attached to the screw is mobile

– fig.1.

• Click the base onto the EasyFix System

– fig.2 and 3.

• Adjust the angle of the base on the board

– fig.4. We recommend that the base is adjusted to a 45° angle for

greater comfort.

What water to use?

• Your appliance has been designed to operate using untreated tap water. However, it is necessary to operate

the Self-Clean function regularly in order to eliminate hard water deposits from the steam chamber.

• Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain

organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the

appliance: water from clothes dryers, scented or softened water, water from refrigerators, batteries, air conditioners,

rain water, boiled, filtered or bottled water. These types of water should not be used in your iron. Also only use distilled

or demineralised water as advised below.

• If your water is very hard, it is possible to mix untreated tap water with store-bought distilled or demineralised

water in the following proportions : 50% tap water, 50% distilled or demineralised water.

Filling the water tank

• Fill the tank up to the “MAX”. Never fill the appliance by holding it directly under the tap. Do not

remove the anti-scale valve to fill the water tank.

• Unplug the base from the socket.

• Place the iron on the base.

• Open the tank filling flap and fill the tank up to “MAX”

– fig.5.

• Close the tank filling flap.

Using the appliance

Turning on

• Connect the base to a 220-240V socket

– fig.6.

• Adjust the temperature

– fig.7

. Your iron has the Autosteam Control function. Your iron automatically and

accurately determines the exact temperature and steam flow that are suitable, in order to guarantee the best

results.

• The flashing green light

– fig.8

located on the display panel on the back of the base indicates that the iron is

heating up. When the light stops flashing

– fig.9

, the iron is ready to use.

• Do not place the iron on its heel during the resting period, but on its base

– fig.13.

Operation of the display panel

• Flashing green light: iron is heating up

– fig.8.

• Fixed green light: iron is ready

– fig.9.

• The flashing red light and beep sounds after around 30s when the iron is not on its base: the iron must be replaced

on the base for recharging

– fig.14.

• Flashing orange light (according to model): Auto-Off function activated (see the section “Auto-Off safety”)

–

fig.16.

RECOMMENDATIONS

• Your iron heats up quickly: start with fabrics that are ironed at a low temperature and finish with those that

require a higher temperature.

• If you lower the thermostat temperature, place the iron on its base and wait (around 10 minutes)

until the temperature drops to avoid burning the fabric.

• If you are ironing a fabric with a mixture of fibres: adjust the ironing temperature to the most delicate fibre.

Steam / Dry Ironing

• Check if there is water in the tank before using the variable steam trigger or the TURBO and SPRAY

functions.

• During your ironing session, hold down the trigger located under the handle (at least 5s at a time) to obtain a

constant flow of steam and guarantee the best results

– fig.10

. When the trigger is released, the steam stops.

TEFAL621-Freemove_1800122940_Mise en page 1 09/02/12 14:04 Page5

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tefal FV9910 Freemove in the language / languages: All languages as an attachment in your email.

The manual is 14,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tefal FV9910 Freemove

Tefal FV9910 Freemove User Manual - Dutch - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tefal FV9910 Freemove Manual

Product: